Table of Contents
Advertisement
Operation
Operation
- A inactive menu options aren't available in this monitor.
It's only available to connect with PDP Tuner (RP-BA50).
T
urning on the Monitor
T
urning on the Monitor
Turning on the Monitor just after installation
1. Connect power cord correctly.
2. Press the
ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby
mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT,
MULTIMEDIA button on the remote control to switch the Monitor on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor was turned off with the
• Press the
ON/OFF button on the Monitor to turn the Monitor on.
2. If the Monitor was turned off with the remote control and the
• Press the
ON/OFF button on the Monitor and then press the INPUT SELECT button on the
Monitor. Or, on the remote control, press POWER, INPUT SELECT, or MULTIMEDIA to turn the
Monitor on.
Menu Language Selection
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
2. Press the
G
button and then use
G
3. Press the
button and then use
From this point on, the on-screen menus will be shown in the language of your
choice.
4. Press the ENTER button to save.
ON/OFF button on the Monitor
button to select the
D
E
/
button to select
D
E
/
D
E
button to select your desired language.
/
ON/OFF button on the Monitor
menu.
.
Operation
SPECIAL
SPECIAL
G
English
Language
Key lock
Español
ISM Method
Português
Français
Low power
Set ID
Caption / Text
Captions
OSD Rotate
MENU
Prev.
Owner's Manual 15
Advertisement
Table of Contents
