Moving The Pip Sub Picture; Pop(Picture-Out-Of-Picture: Channel Scan) - LG 42PX5D Owner's Manual

Moving the PIP sub picture
Moving the PIP sub picture
In PIP mode, press the D / E / F / G
screen.
Adjusting Main and Sub Picture Sizes for
Adjusting Main and Sub Picture Sizes for
Use the D / E / F / G button to change main and sub picture sizes in Twin Picture mode.
i.e)
POP POP (Picture-out-of-Picture: Channel Scan) (Picture-out-of-Picture: Channel Scan)
- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen displays,
(while the main picture source remains the current channel). The pictures of all the programmed channels
are searched with the 3 POP screens.
- Notes:
• Run EZ Scan channel search before using POP mode.
• When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise
• from the Tuner switch.
1. Press the PIP button to activate the POP mode while in PIP mode.
• Channel selection: Use
screen to shift it for viewing on the Main screen.
• PIP selection: Use
D / E
• When watching TV on Main picture, TV or DTV on Sub pictures are in channel scanning. However,
when watching DTV on Main picture, only TV on Sub picture is in channel scanning.
2. Press the EXIT button to cancel POP mode.
button to move the sub picture to a different location on the
If screen is adjusted to the
maximal size, the large
screen is filled with entire
screen vertically as shown.
F button to enlarge the selected channel being searched on the PIP
button to select one of 3 PIP screen pictures in POP mode.
T win Picture
T win Picture
Operation
D
F
TV 2-0
E
TV 4-0
TV 6-0
Owner's Manual 87