Installation - Home Decorators Collection 30761 Assembly Instructions Manual

Installation

1
Removing the doors and drawers
□ Before installing the filler, remove the doors
and drawers from the vanity base.
□ Open each drawer as far as possible.
□ Push the bracket lever underneath the drawer
box (refer to step-1 image) and disconnect
the drawer box from the slide.
□ For each door press to open the hinges to
remove the doors (refer to step-2 image).
2
Securing the filler to the vanity
□ Align the filler (A) to the side of the vanity base.
□ Rotate the filler (A) upside down for left/right configurations.
□ Using a drill, insert 4x25mm screws (AA) into the pre-drilled holes in the inside of vanity base (as shown in illustrations).
A
AA
5
Please contact 1-800-998-7021 for further assistance.
Step-2
NOTE: Illustrations show left and right
positioning. Each filler is sold individually.
HOMEDEPOT.COM/HOMEDECORATORS
Step-1
AA