Advertisement
Installation
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Engine and Component Installation
Inspect Engine and components (components not included) which will be installed on
Engine looking for damaged, loose, and missing parts before installation, set up and
starting. If any problems are found, do not use equipment until fixed properly.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagrams on page 16.
Install Engine
1. Using a motor mount plate specifically designed
for the go-kart frame to be used (both not
included), install the motor mount onto the
frame. Secure in place using hardware supplied
with the motor mount (not included).
2. Align the mounting holes on the Engine
Installation Plate with the four mounting
bolts on the motor mount plate.
3. Lower Engine onto motor mount and secure
in place with hardware supplied with the motor
mount (not included). Refer to motor mount
installation instructions for torque specifications.
Install Exhaust pipe/Muffler
1. Install the Exhaust Port Gasket
onto the exhaust port studs.
2. Attach the exhaust pipe/muffler (not
included) to the studs using two spring
washers and two M8 nuts.
Page 8
For technical questions, please call 1-888-866-5797.
Engine Installation plate
Exhaust port
Exhaust port
Exhaust port
ITEM 57531
Advertisement
