Recommended Sae Viscosity Number - Kia Cerato 2021 Manual

Specifications & Consumer information
Recommended SAE viscosity num -
ber
CAUTION
Always be sure to clean the area
around any filler plug, drain plug, or
dipstick before checking or draining
any lubricant. This is especially
important in dusty or sandy areas
and when the vehicle is used on
unpaved roads. Cleaning the plug
and dipstick areas will prevent dirt
and grit from entering the engine
and other mechanisms that could be
damaged.
Engine oil viscosity (thickness) has
an effect on fuel economy and cold
C -30
Temperature
-10
( F)
(Petrol)
*1
1.6 MPI
(Petrol)
*2
1.6 T-GDi
(Petrol) 2.0 MPI
Smartstream
G1.6
*1. For better fuel economy, it is recommended to use the engine oil of a viscosity grade 5W-20 (except
Middle East - API SN Plus or ILSAC GF-5) or 5W-30 (for Middle East ACEA A5). However, if the engine
oil is not available in your country, select the proper engine oil using the engine oil viscosity chart.
*2. For better fuel economy, it is recommended to use the engine oil of a viscosity grade 5W-30 (ACEA A5).
However, if the engine oil is not available in your country, select the proper engine oil using the engine oil
viscosity chart.
An engine oil displaying this American Petroleum Institute (API)
Certification Mark conforms to the International Lubricant Specifi -
cation Advisory Committee (ILSAC). It is recommended to only use
engine oils that uphold this API Certification Mark.
Temperature Range for SAE Viscosity Numbers
-20 -10 0
0 20
5W-30, 5W-40
5W-20, 5W-30
Recommended lubricants and capacities
weather operating (engine start and
engine oil flowability). Lower viscos -
ity engine oils can provide better
fuel economy and cold weather per -
formance, however, higher viscosity
engine oils are required for satisfac -
tory lubrication in hot weather.
Using oils of any viscosity other
than those recommended could
result in engine damage.
When choosing an oil, consider the
range of temperature your vehicle
will be operated in before the next
oil change. Proceed to select the
recommended oil viscosity from the
chart.
10 20
40 60 80
5W-20
0W-20
30 40 50
100 120
9 13
9