Advertisement
Alarm LED
Pairing Button
Signal Strength
Step 1: Installation
Mount and wire the alarm according to the installation instructions.
***Maximum distance between modules should be 200ft.
Step 2: Signal Strength Check
Press pairing button
updates.
Reposition the indoor module until 1 or more signal LEDs are illuminated green.
Step 3: Test Alarm
Verify the alarm is functioning by triggering an alarm condition on the outdoor panel and verify the indoor
CSION® alarm is alarming. Alarm LED on CSION® RF
color when alarming and the audible alarm will sound. For CSION® WiFi alarm units, verify a text or email
notifi cation of alarm was received.
Monthly Testing
Verify at least 1 or more signal LEDs are illuminated green monthly
able.
CSION
Operation Guide
for 1 second on the panel module to enter setup mode for fast signal strength
RF Alarm
®
and CSION® alarms will illuminate amber in
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
, and repeat step 3 as you are
Advertisement
Table of Contents
Summary of Contents for CSI CLASSIC CSION RF
- Page 1 CSION RF Alarm ® Operation Guide Alarm LED Pairing Button Signal Strength Step 1: Installation Mount and wire the alarm according to the installation instructions. ***Maximum distance between modules should be 200ft. Step 2: Signal Strength Check Press pairing button for 1 second on the panel module to enter setup mode for fast signal strength updates.
- Page 2 Troubleshooting Guide 1 red blinking LED •Communication between modules has marginal signal strength. -Moving modules is recommended, typically the indoor alarm module. • Move alarms closer to each other or put in a different location. -Maximum distance between modules should be 200ft. -Steel buildings and other structures can interfere with signal strength.
Need help?
Do you have a question about the CSION RF and is the answer not in the manual?
Questions and answers