Related Manuals for KDF HPC-20
Summary of Contents for KDF HPC-20
- Page 1 Chiller for Instruction Manual Before using the HPC-20, please read the manual thoroughly and understand the capabilities and proper usage for this machine. W1014700-2...
-
Page 2: Table Of Contents
■Contents ■Safety Precautions ■Standard Accessories ■Descriptions of Component Parts ●Chiller Parts and Descriptions ■Preparation before Use ●Location & Environment ●Piping of Chiller ●Water Filling for Chiller ■Power On ■Periodic Machine Cleaning ●Dust Proof Filter Cleaning ●Chiller Water Volume Check ■Specifications... -
Page 3: Safety Precautions
■Safety Precautions We recommend you to follow these instruments for proper use of the unit. The safety precautions contained herein and the accompanying icons are provided for the safe use of this machine and to prevent injuries and loss on material resources. Please read them carefully prior to your actual machine operation. - Page 4 WARNING In the event when there is smoke, abnormal odors or sounds, unplug immediately and contact the dealer for repairs. Unplug Continued use may cause electric shock or fire. We recommend you not to attempt repairs yourself. In the event when water or debris enters the machine, unplug immediately and contact the dealer for advice.
- Page 5 CAUTION Do not use or place anything flammable near the machine. Fire or skin burns may result. Prohibited When you unplug the power cord from the power outlet, do not pull the cord. If the cord is damaged, it may cause fire or shock. Prohibited Always remove by handling the plug.
-
Page 6: Standard Accessories
■Standard Accessories When you unpack the machine, we recommend you to make sure that the following standard accessories are included. In addition, please check the machine for any damage or dent on the unit surface. Contact the dealer if there is any damage on the unit. Coolant Packed in a box of chiller and it prevents rust and freeze. -
Page 7: Preparation Before Use P5
■Preparation before use ●Location & Environment Set up the unit on the center of a flat stable table. Keep the unit away from walls and other equipment. Note) Leave minimum of 10cm of space around the unit. Do not place anything flammable near the unit. If it is impossible, conduct fire prevention. ●Piping of Chiller Connect chiller to the unit (Ref. -
Page 8: Water Filling For Chiller P6
●Water Filling for Chiller Remove the white cap of water inlet and install the water funnel provided. (1) Pour every coolant with water funnel. (2) Pour water (tap water) until the F line. (3) Remove water funnel. (4) Put the white cap back on. Note) Thin tube connected to the water funnel is for air outlet. -
Page 9: Periodic Machine Cleaning P7
■Periodic Machine Cleaning In order to maintain the capacity of this unit further longer the following periodic cleaning prior to use are recommended. ●Dust Proof Filter Cleaning If you use the unit with the clogged filter, the cooling fan will not work properly and cause overheating of the parts and machine malfunction.