GME MO520 Quick Start Manual

PRINTING SPECIFICATIONS: MO520 QUICK START GUIDE
Dimensions: 210 X 297 folded to 105 x 99mm
Stock: 130 GSM Satin Art Both Sides
Print: CMYK Throughout
Finish: Folded to size
311139
Part Number:
AIS Man Overboard Beacon
MO520
QUICK START GUIDE

Overview

The MO520 is a man overboard beacon that uses AIS (automatic
identification system) technology. It greatly increases the likelihood of
man overboard rescue by alerting nearby vessels equipped with AIS.
When activated in an emergency situation, the beacon transmits alert
messages including the GPS position and a unique ID, using either
water sensor or manual activation.
The MO520 is built using state-of-the-art technology, it is small and
lightweight, easy to use and is reliable in emergency situations.

In The Box

Item Description
1 MO520 Beacon
2 Carry Case
3 Quick Start Guide
4 Oral Tube Clip
5 Test Tab

Fitting on Life Jacket

Strap Clip
The MO520 is supplied with a clip that can be used
to attach the device to a lifejacket strap.
Oral Tube Clip
The MO520 is supplied with a clip that can be
attached to a life jacket's oral tube. The clip can be
attached on the left or right side of the oral tube.
52139-1
Drawing Number:
ARTWORK SUMMARY
DRAWING #
PART #
JIRA REFERENCE
ECO #
SUPPLIER
MPE #
gme.net.au
GME Pty Ltd
Head Office: 17 Gibbon Road, Winston Hills NSW 2153, Australia. T: +61 (02) 8867 6000
Part Number: 311139 Drawing Number: 52139-1
Item Description
1 Antenna cap
2 Antenna
3 Battery LED (Green/Red)
4 Strobe LED
5 GPS LED (Green/Red)
6 Lanyard
7 Test Area
8 Water sensor
9 Test tab with magnet
10 Activation tab

Activation

The MO520 can be activated
manually or by water sensor.
Caution: Avoid eye injury when
deploying the antenna by pointing
the device away from you.
To activate the MO520 manually:
1. Pull off the red
tab antenna cap
to release the
antenna.
2. Pull off the
activation tab to
start transmission
of messages.
52139-1
311139
GRA-2818
ALLTEK Marine
To activate the MO520 using the
water sensor:
1. Pull off the
red tab
antenna cap
to release
the antenna.
2. The water
sensor is
located
at the
bottom of
the device.
The device
will activate and begin
transmission when the
sensor has been immersed
in water for more than three
seconds.