Subscribe to Our Youtube Channel
Related Manuals for ACTIU MOBILITY STEP
Summary of Contents for ACTIU MOBILITY STEP
- Page 1 MOBILITY STEP By ACTIU INSTRUCTION MANUAL INSTRUCCIONES PARA EL USO BEDIENUNGSANLEITUNG INSTRUCTIONS D’UTILISATION...
- Page 2 ACTIU BERBEGAL Y FORMAS, S.A. - A03137874 Castalla - Alicante - Spain - European Union...
-
Page 3: Table Of Contents
INDEX General Instructions pg. 4 Intended use Basic Safety Regulations Assembly Site Conditions pg. 5 Unboxing Safety at the Desk Operating guidelines pg. 6 Electric overload pg. 7 System assembly and connection Product Description pg. 8 References and Measures pg. 9 pg. -
Page 4: General Instructions
This instruction manual will help you to safely and correctly use your Mobility Step desk, while taking full advantage of all its features. Anyone who uses the Mobility Step should read and apply all the steps and instructions that appear in this manual. If the product is not used correctly, the manufacturer shall not be responsible for any claims, nor for any damages that are caused. -
Page 5: Assembly Site Conditions
Assembly Site Conditions Generally speaking, the following measures will guarantee that the furniture can be assembled in a comfortable and ergonomic way: Straight desks: Twin desks: • 120 x 80 cm: 280 x 280 cm • 120 x 164 cm: 280 x 360 cm •... -
Page 6: Operating Guidelines
In the event that a desk is assembled with two legs of different heights, the leg mechanical system may suffer serious damage. MOBILITY STEP - INSTRUCTION MANUAL_EN... -
Page 7: Electric Overload
Do not use the desk if the power cable shows signs of damage. • In this case, the power cable will need to be replaced by qualified personnel from Actiu’s technical service. System assembly and connection Compact control box Electric legs... -
Page 8: Product Description
Single: Aluminium injected leg. Size 720x78 mm. Double: ABS cap with Polypropylene foot. Height adjustment 64 - 129cm in accordance with EN 527-1:2011. Integrated anti-collision safety system. Injected PP black feet. Anti-slip pad. Straight edge MOBILITY STEP - INSTRUCTION MANUAL_EN... -
Page 9: References And Measures
References and measures (cm) MP612 MP613 References Measures (Straight edge) MP614 MP615 References Measures (Straight edge) MP562 MP563 References Measures (Straight edge) MP564 MP565 References Measures (Straight edge) MP60 References Measures (Straight edge) -
Page 10: Technical Data
Transport and storage temperature -40º - 85º C Storage relative humidity 5 - 90% (non-condensing) Type of ground wire protection Power cable length 3 meters ± 50 mm Movement area Max: 129 cm Min: 64 cm MOBILITY STEP - INSTRUCTION MANUAL_EN... -
Page 11: Remote Controls
Remote controls Up & down remote control Up button Down button Programmable remote control Buttons for saving positions 1-4 Up button Memory button Down button Screen Set up Our first step in setting up an electric height-adjustable table is a RESET of the electronic controls. -
Page 12: Reset Procedure
The display will show “S” and a number. For example “S3”. 3º Release the buttons. 4º Press the UP/RAISE ARROW button until the display shows “S 0” 5º Press the MEMORY button 6º Several "clicks" will be heard and E61 will appear on the display. MOBILITY STEP - INSTRUCTION MANUAL_EN... -
Page 13: Programmable Remote Control Features
7º Wait a few moments until 000 flashes on the display. 8º Press DOWN/LOWER ARROW until the table reaches its minimum height, the height will then appear on the display. NOTE: While the display is flashing the digits 000, the table can only be lowered slowly. -
Page 14: Setting The Height Limits
2º To remove it press the up/raise button until the desk reaches the position and hold the “S” button for ten seconds. A double click will confirm that the upper limit has been removed. MOBILITY STEP - INSTRUCTION MANUAL_EN... -
Page 15: Safety Instructions
What do to if there is a fault In the event of a fault, such as, for example, the motors being blocked, do not use the desk and contact your Actiu distributor. -
Page 16: Damage Repair
If you are unable to clear the error message, disconnect the desk from the power supply, wait a few minutes, and try RESETTING the desk. If the error occurs again, disconnect the desk from the power supply and contact Actiu. MOBILITY STEP - INSTRUCTION MANUAL_EN... -
Page 17: Maximum Weight
Maximum weight Mobility Step table can bear a vertical load up to 60 kg. The aforesaid load should be exerted on the column and centre of gravity of the table and always with the wheels blocked. Mobility Step table is a mobile table, therefore it is advisable not to move the table when there is load on top of it. -
Page 18: Disconnecting The Table
Electronic parts and components must be disposed of at an electronics recycling collection point. All other components must be disposed off in accordance with the corresponding local waste management laws. Please contact your Actiu dis- tributor for more information. Replacement parts Please contact your Actiu distributor.
Need help?
Do you have a question about the MOBILITY STEP and is the answer not in the manual?
Questions and answers