Table of Contents
Advertisement
A
S
UTOMATIC
An object detection device is located behind the scanner window initiates the
scanning process. In short range mode the signal projects approximately
101.61 mm – 177.84 mm (4" – 7") beyond the output window. In long range
mode the signal projects approximately 228.61 mm – 330.21 mm (9" – 13")
beyond the output window. The object detection device remains active as long
as the unit is powered.
When the unit remains dormant for a time, the laser will turn off. In this stage, the
scan engine's computer is on "standby". To reactivate the unit, present an object
within the scan field.
A
PPLICATIONS AND
The model number on each scan engine includes the scan engine number and
communications protocol.
Unit
IS4110
IS4125-41
IS4125-76
IS4125-47
IS4125-38
IS4125-63
IS4125-163
A
CAN
CTIVATION
P
ROTOCOLS
Communication Protocol(s)
RS232 and Light Pen Emulation
(Flash Upgradeable Firmware)
Keyboard Wedge, Stand Alone Keyboard
(Flash Upgradeable Firmware)
Low Speed USB
Keyboard Emulation or Serial Emulation Mode
RS232 and Light Pen Emulation
(Flash Upgradeable Firmware)
Laser Data
TTL, RS232
Type
Non-decode
Decode
Standard
Decode
High-Density
5
Advertisement
Table of Contents
