Standards and has the highest possible water efficiency rated 6 Stars. Licence number 1718. DDA Compliant Suitable for use for AS 1428.1 design and access requirements when installed in reference to AS 1428.1 2009 Amendment 1 MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 2 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
(Figure 4). Connect the solenoid valve and the sensor. The faucet is now ready for use (Figure 5). MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 3 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Page 4
If the problem persists, check that the sensing range is adequate i.e. installed above the washbasin no less Solution than 25cm. Check that the basin surface is not stainless steel or reflective. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 4 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
The filter screen on the solenoid valve inlet should be cleaned regularly to avoid excessive blockage and obstruction caused by impurities resulting in low water flow. MEFE—Mitchell Engineering Food Equipment Pty Ltd Page 5 23 Storie Street Clontarf QLD 4019 Australia +617 3283 4536 www.mefe.com.au | info@mefe.com.au...
Need help?
Do you have a question about the CAT 673031 and is the answer not in the manual?
Questions and answers