Table of Contents
Advertisement
78
Bluetooth Phone/Devices
Listing All Paired and Connected
Phones/Devices
1. Press CONFIG on the
faceplate.
2. Select Phone Settings.
3. Select Device List.
Deleting a Paired Phone/Device
1. Press CONFIG on the
faceplate.
2. Select Phone Settings.
3. Select Device List.
4. Select the phone to delete and
follow the screen prompts.
Connecting to a Different Phone
To connect to a different phone, the
new phone must be in the vehicle
and available to be connected to the
Bluetooth system before the
process is started.
1. Press CONFIG on the
faceplate.
2. Select Phone Settings.
3. Select Device List.
4. Select the new phone to
connect to and follow the
screen prompts.
Pairing with Voice Recognition
A Bluetooth-enabled cell phone
must be paired and then connected
to the vehicle before it can be used.
See the cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
See OnStar in the owner manual.
Pairing a Phone
1. Press
/
on the steering
wheel controls. The system
responds Please say a
command, followed by a tone.
2. Say Pair. The system
responds with Please search
for Bluetooth devices on your
phone, select your vehicle,
confirm or enter the PIN
number provided on the
screen.
3. Start the search for Bluetooth
devices on the phone. Then
select the device and follow the
instructions on the phone by
either entering the four-digit
PIN or confirming the six-digit
passcode. The PIN is used in
Step 4.
4. Locate and select the device
named after the vehicle make
and model in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3 or to
confirm the six-digit code
matches. The system responds
Successfully paired.
5. Repeat Steps 1 4 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds to confirm that
phone name is connected.
Advertisement
Table of Contents
