Advertisement
Quick Links
Table of Contents
BOL-OR-40-BK-SM
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department
can also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Signal
Words.................................................................................................................
Safety
Instructions..........................................................................................................
Exploded View and Bill of
Installing the
Bollard........................................................................................................
Record of Satisfactory
Inspections &
Maintenance...............................................................................................
Limited
Warranty............................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
Table of Contents
Materials....................................................................................
Condition.......................................................................................
Copyright 2020 Vestil Manufacturing Corp.
Rev. 11/20/2020
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestilmfg.com
BOL-OR-40-BK-SM MANUAL
e-mail:
info@vestil.com
https://www.vestil.com/page-
Page 1 of 5
Page
2
2
3
3
4
4
5
Advertisement
Summary of Contents for Vestil BOL-OR-40-BK-SM0
- Page 1 For answers to questions not addressed in these instructions and to order replacement parts, labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department can also be contacted online at https://www.vestil.com/page-parts-request.php. Electronic Copies of Instruction Manuals Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-...
-
Page 2: Signal Words
DO NOT attempt to resolve any problems with the product unless you are qualified to repair this type • of equipment. DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. • Unapproved modifications automatically void the... - Page 3 8. Insert the bottom end of the bollard into the socket. Rotate the bollard until it seats into the socket. 9. Tighten the set screw with a hex wrench to secure the bollard in the socket. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 3 of 5...
-
Page 4: Inspections And Maintenance
Replace damaged/worn/corroded hardware. Reattach socket to ground with anchoring hardware. 4. Labels (if applicable) – Replace damaged labels and labels that are not easily readable from a reasonable distance. Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 4 of 5... -
Page 5: Limited Warranty
Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. Definition of “original part”? An original part is a part used to make the product as shipped to the Warrantee.