Advertisement
29FL94
29FL94
For adjustments of this model, the bus data is converted to various analog signals by the D/A converter
For adjustments of this model, the bus data is converted to various analog signals by the D/A converter
circuit.
circuit.
Note:
Note:
There are still a few analog adjustments in this
There are still a few analog adjustments in this
Follow the steps below whenever the service adjustment is required. See "Table-B" to determine, if serv-
Follow the steps below whenever the service adjustment is required. See "Table-B" to determine, if serv-
ice adjustments are required.
ice adjustments are required.
1.
1.
Servic
Ser
vice mo
e
mode
de
Before putting unit into the
Before putting unit into the
customer adjustments are in the normal mode. Use
customer adjustments are in the normal mode. Use
the reset function in the video adjustment menu to
the reset function in the video adjustment menu to
ensure customer controls are in their proper (reset)
ensure customer controls are in their proper (reset)
position.
position.
2. Service number selection
2. Service number selection
Once in the service mode, press the
Once in the service mode, press the
down button on the remote controller or
down button on the remote controller or
The service adjustment number will vary in
The service adjustment number will vary in
increments of one, from "V01" to "M20". Select the
increments of one, from "V01" to "M20". Select the
item you wish to adjust.
item you wish to adjust.
3.
3.
Data
Data n
numb
umber sel
er
Press the Vol-up or Vol-down button to adjust the data
Press the Vol-up or Vol-down button to adjust the data
number.
number.
SERVICE ADJUSTMENT NUMBER
SERVICE ADJUSTMENT NUMBER
service mode, check that
service mode, check that
Ch-up or Ch-
Ch-up or Ch-
at the set.
at the set.
selecti
ection
on
DATA NUMBER
DATA NUMBER
series such as focus and master
series such as focus and master
To enter the service mode and exit serv-
To enter the service mode and exit serv-
ice mode.
ice mode.
To enter the service mode manually just press and hold
To enter the service mode manually just press and hold
the Vol-down and Ch-up buttons at the
the Vol-down and Ch-up buttons at the
the AC cord into a wall socket.
the AC cord into a wall socket.
Now the TV set is switched on and
Now the TV set is switched on and
mode.
mode.
To exit the service mode, turn the television off by
To exit the service mode, turn the television off by
pressing the power button.
pressing the power button.
CHANNEL
CHANNEL
V05
V05
3F(063)
3F(063)
Figure A.
Figure A.
6
6
screen voltage.
screen voltage.
same time, plug
same time, plug
enters the service
enters the service
2
2
Advertisement
