Sun joe L-DW047PST-3D Assembly Instructions
Sun joe L-DW047PST-3D Assembly Instructions

Sun joe L-DW047PST-3D Assembly Instructions

Service cart

Advertisement

Quick Links

Item# L-DW047PST-3D
Our clear, easy-to-follow, step by step instructions will guide you through the project from start to finish. The final
product will be a quality piece that will assemble easily and give years of enjoyment.
IMPORTANT:
Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the
accompanying illustrations to assure safe and proper assembly.
Repeated assembly can weaken the locking ability of the washers. Periodically check all bolted connections on
your service cart to make sure they are tight and secure. Please keep the instructions for future reference.
WARNING:
Read and follow all Warnings & Assembly Instructions before attempting to assemble.
Begin assembly not less than 6 feet from any obstruction such as a fence, garage, house, overhanging branches,
laundry line, or electrical wires.
Some parts may contain sharp edges.
Wear protective gloves as necessary.
Keep children away from assembly area.
Assemble on level ground.
Do not over tighten any of the bolts or nuts, but do tighten each bolt and nut until firm.
Check all nuts and bolts for tightness before and during usage.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-DW047PST-3D and is the answer not in the manual?

Questions and answers

Summary of Contents for Sun joe L-DW047PST-3D

  • Page 1 Assembly Instructions Item# L-DW047PST-3D Our clear, easy-to-follow, step by step instructions will guide you through the project from start to finish. The final product will be a quality piece that will assemble easily and give years of enjoyment. IMPORTANT: Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to assure safe and proper assembly.
  • Page 2 Parts list: Description Table Top Cutting Board Left Support frame Right Support frame Basket (Pre-assemble slide and slide tube) Bottom shelf Wheel Braked wheel Towel bar M6*15 bolt M6*20 bolt Ф6 flat washer M12 wrench M6*50 bolt( Pre-assembled) M6 wrench Tools required: screw driver (not include).
  • Page 3 Step 3: Put the Table top (A) upside down. Connect Step 4: Attach the Wheel (F) and braked wheel (G) assembled Support frame (C) and Table top (A) with on the Support frame (C) and tighten with wrench bolt (AA) and flat washer (CC). Then fully tighten all (DD).
  • Page 4 Step 7: Attach Towel bar (H) to Left Support frame (C1), fix them with bolt (EE) and washer (CC). Now, your Service Cart is ready for use. **Special Note: There are two ways to use the cutting board. One way is to pull the drawer out and use the exposed Portion of the cutting board –...

Table of Contents