Table of Contents
Advertisement
Quick Links
Operating instructions
secuENTRY KeyApp
BURG-WÄCHTER KG
BURG-WÄCHTER UK LTD
Altenhofer Weg 15
Eurocam Technology Park
58300 Wetter
Chase Way, Bradford, West Yorkshire
Germany
England BD5 8 HW
www.burg.biz
Contents index
iOS version
Description .......................................................................................................................... 2
English
1 Download and install the secuENTRY KeyApp .................................................... 2
2 Setting up the secuENTRY KeyApp ......................................................................... 2
3 How is a lock registered in the secuENTRY KeyApp? ......................................... 4
4 Open with the secuENTRY KeyApp ......................................................................... 4
5 Functions ........................................................................................................................... 5
5.1 secuENTRY E-Key ............................................................................................... 5
5.1.1 Manuel registration .............................................................................. 5
5.1.2 E-Key functions ...................................................................................... 6
5.1.3 secuENTRY units ................................................................................. 10
5.2 secuENTRY Bridge .......................................................................................... 11
en
5.2.1 Log in/ Registration ........................................................................... 12
5.2.2 Family ...................................................................................................... 14
5.2.3 secuENTRY Bridge & assignments ................................................ 17
5.2.4 Access codes ........................................................................................ 18
5.3 Video Bell ........................................................................................................... 20
5.3.1 Log in/ Registration ........................................................................... 21
5.3.2 Family ..................................................................................................... 23
5.3.3 Video Bell units & assignments ...................................................... 26
5.3.4 Video Bell display ................................................................................ 29
5.3.5 Firmware update ................................................................................ 30
5.3.6 Direct access button ......................................................................... 30
5.4 BURGcam .......................................................................................................... 30
5.4.1 Login / create an account ................................................................ 31
5.4.2 Family ...................................................................................................... 33
5.4.3 BURGcam units & assignments ...................................................... 36
5.4.4 BURGcam display ................................................................................ 39
5.4.5 Firmware update ................................................................................ 40
5.4.6 Direct access button ......................................................................... 40
5.5 eBoxx .................................................................................................................. 40
5.5.1 eBoxx settings ..................................................................................... 41
5.5.2 Account settings ................................................................................ 43
5.5.3 Direct access button ......................................................................... 48
5.6 Config file PC software ................................................................................. 49
5.6.1 Import config files ............................................................................. 49
5.6.2 Readout history .................................................................................. 50
5.6.3 Display history ..................................................................................... 50
5.6.4 Remove history ................................................................................... 51
5.6.5 Program lock ........................................................................................ 51
5.6.6 Remove config files ........................................................................... 51
5.7 History ................................................................................................................ 52
5.7.1 Readout history ................................................................................... 52
5.7.2 Lock history ........................................................................................... 53
5.7.3 KeyApp history .................................................................................... 54
5.8 Firmware update ............................................................................................ 54
5.9 Settings .............................................................................................................. 55
5.9.1 Password ............................................................................................... 56
5.9.2 Administrator code ........................................................................... 56
5.9.3 I want to help ....................................................................................... 56
5.9.4 Info .......................................................................................................... 56
Advertisement
Table of Contents
Summary of Contents for Burg Wächter secuENTRY 5705 HALF
-
Page 1: Table Of Contents
Contents index iOS version Description .......................... 2 English 1 Download and install the secuENTRY KeyApp ............ 2 2 Setting up the secuENTRY KeyApp ................. 2 3 How is a lock registered in the secuENTRY KeyApp? ......... 4 Operating instructions 4 Open with the secuENTRY KeyApp ................. 4 5 Functions ........................... -
Page 2: Description
Operating instructions Description 1. Download and install the secuENTRY KeyApp The KeyApp from BURG-WÄCHTER allows another option to open / lock locks of the secuENTRY series. In addition When entering the search term "secuENTRY" and / or "KeyApp" in the Apple App Store, you are taken directly to the to the unlocking media already known, such as Pincode, Fingerprint or Passive transponder, now there is also the download area of the app. - Page 3 If you already have a BW Cloud Account, you can login as usual. If you have specified that you do not want to use the BW Cloud in the previous menu, you can still connect to this at a later time. In both cases, you can skip the Here, enter your first name as well as last name and your following steps.
-
Page 4: How Is A Lock Registered In The Secuentry Keyapp
3. How is a lock registered in the secuENTRY KeyApp? Press the Menu button Press the "Add" button Enter the name for the device and corresponding Press the "E-Key" button administrator code. Press the "START PROCESS" button. The KeyApp is registered in the lock after a short period. -
Page 5: Functions
5.1.1 Manuel registration 5. Functions Manually registered locks and eBoxxes can be opened via the "GET ACCESS" button. This section gives you a description of the various functions. 5.1secuENTRY E-Key The E-Key menu contains functions for using secuENTRY profile cylinders. Note: The "Manual registration" and the "Direct access buttons" can also be used for the BURG-WÄCHTER eBoxx EASY+ parcel box. -
Page 6: E-Key Functions
5.1.2 E-Key functions 5.1.2.2 KeyLess The KeyLess Entry function allows the locks assigned under "secuENTRY list" to be opened automatically without having to press the "GET ACCESS" button again, or use another opening secret (Pincode, Fingerprint or Transponder). For this purpose, under "secuENTRY list" you have to set which known locks should be opened in this manner. As soon as the registered smartphone is within the area of detection, the lock is opened automatically. - Page 7 Home WLAN detection: Timer: Selection of the WLAN network that should be used for communication. After opening one time, the system is KeyLess Under this menu, you can setup the time window where the KeyLess Entry is activated. Deviating from this time, the active for 3 minutes.
- Page 8 Add lock 5.1.2.3 secuENTRY list All known locks are displayed in the WHITE list. Here you can decide if the "KeyLess Entry" function should be activated for each lock. The locks can also be renamed. Activate KeyLess Entry: Add a new lock Bild noch falsch! “START PROCESS”...
- Page 9 Add a lock: 5.1.2.4 Direct access buttons The direct access buttons can be allocated in order to allow a lock to be opened from the start screen. New locks can also be added. Assign direct access keys: Add a new lock Choose a lock Choose one of the buttons.
-
Page 10: Secuentry Units
Connect the keypad: 5.1.3 secuENTRY units A lock can also be connected with a keypad in the app. The direct access buttons can be allocated in order to allow a lock to be opened from the start screen. New locks can also be added. Schreibweise eBoxx EASY+ Schreibweise eBoxx EASY+ Select "eBoxx units". -
Page 11: Secuentry Bridge
Add a lock: 5.2 secuENTRY Bridge Locks that are contacted via a bridge are contacted by WLAN instead of Bluetooth. As a result, the opening takes a little longer, but you are able to open the lock from everywhere as long as you have an internet connection. Each bridge can only be connected to one lock. -
Page 12: Log In/ Registration
Log in: 5.2.1 Log in/ Registration If you have made a decision for a Cloud Account during setup and have not logged out since then, you can skip this step. Otherwise you will have to login or create a new account. Enter your password and press the button You have successfully logged in. - Page 13 Change password: Recover password: Press this button Press this button Enter the 6 digit verification code that you have received per e-mail and press the button. Enter your email address and press the button Fig. 1 Fig. 2 Fig. 1 Fig.
-
Page 14: Family
Activate family group: 5.2.2 Family If several family groups are entered, one of them must be marked as the currently active group. The active group is displayed with the double tick. Access is available to the devices of the active family group. The Family functions make it easy for families to set up Bridges, BURGcams and Video Bells. - Page 15 Add family members: Family members can only be added by the family administrator. Swipe your own name to the left to disconnect. The family group will then no longer be displayed. Select family group Display family list Fig. 3 Fig. 4 Fig.
- Page 16 An invitation that has been sent must first be accepted by the other family member before this member becomes part Remove family members: of the family group. Invitations that have not yet been accepted are marked with a yellow icon next to the name. These steps must be performed on the invited family member's smartphone.
-
Page 17: Secuentry Bridge & Assignments
Allocate a lock: 5.2.3 secuENTRY Bridge & assignments Add secuENTRY Bridge: Supply the secuENTRY Bridge with power by inserting the USB cable. Keep the Reset button pressed for 5 seconds. The green LED starts to flash. Choose a Bridge Add a Bridge Enter a name for the Bridge Enter the password for your WLAN network Search for locks nearby... -
Page 18: Access Codes
Display assigned locks: Remove Bridge: Show lock Choose a Bridge Swipe to the left Fig. 1 Fig. 2 Fig. 3 Fig. 1 Remove assigned locks: 5.2.4 Access codes Locks that are contacted per Bridge may also contain access codes limited by time. In doing so however, it is important that these are also activated in the chronological order. - Page 19 For increased security, we use the 2-factor authentication. The access code is sent per e-mail, the Init Key in an SMS. (Old) access codes can be deleted. Continue Choose a lock Enter the code or have it generated Swipe to the left to open the menu Continue Fig.
-
Page 20: Video Bell
Delete an access code: 5.3 Video Bell With a DOOR eGUARD Video Bell, you can see what your device sees using these functions. Communicate with the other party via two-way audio. It is also possible to take photos/videos and open an assigned lock. Continue Choose a lock Delete the code... -
Page 21: Log In/ Registration
Log in: 5.3.1 Login / create an account If you have made a decision for a Cloud Account during setup and have not logged out since then, you can skip this step. Otherwise you will have to login or create a new account. Create an account: Enter your password and press the button... - Page 22 Change password: Recover password: Press this button Press this button Enter the 6 digit verification code that you have received per e-mail and press the button. Enter your email address and press the button Fig. 1 Fig. 2 Fig. 1 Fig.
-
Page 23: Family
Activate family group: 5.3.2 Family If several family groups are entered, one of them must be marked as the currently active group. The active group is displayed with the double tick. Access is available to the devices of the active family group. The Family functions make it easy for families to set up Bridges, BURGcams and Video Bells. - Page 24 Add family members: Family members can only be added by the family administrator. Swipe your own name to the left to disconnect. The family group will then no longer be displayed. Select family group Display family list Fig. 3 Fig. 4 Fig.
- Page 25 An invitation that has been sent must first be accepted by the other family member before this member becomes part Remove family members: of the family group. Invitations that have not yet been accepted are marked with a yellow icon next to the name. These steps must be performed on the invited family member's smartphone.
-
Page 26: Video Bell Units & Assignments
Display unit information: 5.3.3 Video Bell units & assignments Add Video Bell: Switch on the Video Bell by moving the switch on the back panel to "ON". The light circle around the bell button will flash. Note: If the system is not operational, press and hold the reset button on the bottom of the unit for approximately 10 seconds. - Page 27 Unit information: Basic settings: For example, if you mount the camera upside down due to lack of space, you can rotate the display here. The date and time can also be displayed. Turn the display upside down Show date/time Fig. 1 Fig.
- Page 28 Allocate a lock: Display assigned locks: Select Video Bell Select Video Bell Show lock View locks in the WHITE list Fig. 1 Fig. 2 Fig. 1 Fig. 2 Choose a lock Fig. 3 Fig. 3 28 I English 28 I English secuENTRY KeyApp - iOS secuENTRY KeyApp - iOS...
-
Page 29: Video Bell Display
Remove assigned locks: 5.3.4 Video Bell display Locks that are contacted per Bridge may also contain access codes limited by time. In doing so however, it is important that these are also activated in the chronological order. One-time access keys are also possible in the future. Battery level Open settings menu Setting the PIR sensor sensitivity... -
Page 30: Firmware Update
5.3.5 Firmware update 5.4 BURGcam Future Video Bell unit firmware updates can be imported via this menu item. With a BURGCam you can see what your device sees using these functions. Communicate with the other party via two-way audio. It is also possible to take photos/videos and open an assigned lock. Select Video Bell Press the Menu button Press the "BURGcam"... -
Page 31: Login / Create An Account
Log in: 5.4.1 Log in/Registration If you have made a decision for a Cloud Account during setup and have not logged out since then, you can skip this step. Otherwise you will have to login or create a new account. Enter your password and press the button You have successfully logged in. - Page 32 Change password: Recover password: Press this button Press this button Enter the 6 digit verification code that you have received per e-mail and press the button. Enter your email address and press the button Fig. 1 Fig. 2 Fig. 1 Fig.
-
Page 33: Family
Activate family group: 5.4.2 Family If several family groups are entered, one of them must be marked as the currently active group. The active group is displayed with the double tick. Access is available to the devices of the active family group. The Family functions make it easy for families to set up Bridges, BURGcams and Video Bells. - Page 34 Add family members: Family members can only be added by the family administrator. Swipe your own name to the left to disconnect. The family group will then no longer be displayed. Select family group Display family list Fig. 3 Fig. 4 Fig.
- Page 35 An invitation that has been sent must first be accepted by the other family member before this member becomes part Remove family members: of the family group. Invitations that have not yet been accepted are marked with a yellow icon next to the name. These steps must be performed on the invited family member's smartphone.
-
Page 36: Burgcam Units & Assignments
Display unit information: 5.4.3 BURGcam units & assignments Add BURGcam: Switch on the BURGcam by connecting the power cable. The camera will emit an acoustic signal. Select BURGcam Add BURGcam Enter a name for the BURGCam Enter the password for Display unit information your WLAN network Press this button Fig. - Page 37 Unit information: Basic settings: For example, if you mount the camera upside down due to lack of space, you can rotate the display here. The date and time can also be displayed. Turn the display upside down Show date/time Fig. 1 Fig.
- Page 38 Allocate a lock: Display assigned locks: Select BURGcam Select BURGcam Show lock View locks in the WHITE list Fig. 1 Fig. 2 Fig. 1 Fig. 2 Choose a lock Fig. 3 Fig. 3 38 I English 38 I English secuENTRY KeyApp - iOS secuENTRY KeyApp - iOS...
-
Page 39: Burgcam Display
Remove assigned locks: 5.4.4 BURGcam display Open settings menu Set lamp View of the device Set motion sensitivity Select BURGcam Swipe to the left Show lock Set motion alarm Switch between mute & sound playback on your smartphone Open lock Switch between Standard &... -
Page 40: Firmware Update
5.4.5 Firmware update 5.5 eBoxx Future Video Bell unit firmware updates can be imported via this menu item. An eBoxx EASY+ allows you to receive parcels securely when you are away. Generated codes that you communicate to the deliverers enable them to deliver your parcels. Press the Menu button Select BURGcam Press the "eBoxx"... -
Page 41: Eboxx Settings
5.5.1 eBoxx settings In order to be able to set up your eBoxx for users, you must first register them in the KeyApp. Then press the "Continue" button Enter the name for the device and corresponding administrator or user code. Press the "Start" button. It takes just a short time for the eBoxx to be registered. - Page 42 Reset user code: 5.5.1.2 User You can create, delete or reset user codes in the user menu to assign a new code. Create user code: Swipe the user to the right and press the icon that appears on the left. Add a new user Enter the administrator code and Select the eBoxx for which you press the "Reset code"...
-
Page 43: Account Settings
5.5.1.3 My eBoxx 5.5.2 Account settings This menu item is only relevant for you if you have several parcel boxes. This menu includes all the settings that a user can perform without the administrator. If you have an eBoxx system (more than one eBoxx), perform commissioning and setting up of all of the eBoxxes as described above. - Page 44 Change deliverer code: 5.5.2.2 Code management As a user, generate deliverer and one-time codes to receive parcels. Generated one-time codes can only be used once. Alternatively, you can use a one-time code to transfer a parcel to other persons. Swipe the deliverer to the right and press the icon that appears on the left.
- Page 45 Create one-time code 5.5.2.3 History One-time codes lose their validity after use. They are ideal for transferring or receiving parcels only once. You can readout and display the history of the eBoxx. It is also possible to display the history of the app. Readout history: Generate one-time codes.
- Page 46 Display history: Delete eBoxx history file: Press "Lock history" Press "Lock history" Select your eBoxx Select your eBoxx Fig. 1 Fig. 2 Fig. 1 Fig. 2 Select the history file which you wish Swipe the history file which you wish to display to delete to the left Take the info from the history...
- Page 47 Display KeyApp history: Delete KeyApp history file: Press " KeyApp history" Press " KeyApp history" Select a history file Swipe the history file which you wish to delete to the left Fig. 1 Fig. 2 Fig. 1 Fig. 2 5.5.2.3 Settings This menu contains eBoxx settings that the user can perform.
-
Page 48: Direct Access Button
5.5.3 Direct access button The direct access button enables you to perform a status query of your eBoxx unit from the start screen. Select the date and confirm with the "OK" button. 5.5.3.1 Assign direct access button Select the time and confirm with the "OK"... -
Page 49: Config File Pc Software
5.6 Config file PC software 5.5.3.2 Status query Config Files can be created using the PC software. These can be used to program locks and read out the history. For this purpose, the ".zip" file must be loaded to your mobile phone and opened with the secuENTRY KeyApp. There are various Apps that make it possible to access your files in order to, for example, open these with the KeyApp. -
Page 50: Readout History
For the next functions, you have to open the "Programming config file" menu. 5.6.2 Readout history Enter the Press the Menu button administrator code Readout the history Press the button "Programming config file" The history of the lock is read out after a short period. -
Page 51: Remove History
5.6.4 Remove history 5.6.6 Remove config files Swipe to the left Swipe to the left Fig. 1 Fig. 1 5.6.5 Program lock Enter the administrator code Program the lock Fig. 1 secuENTRY KeyApp - iOS secuENTRY KeyApp - iOS English I 51 English I 51... -
Page 52: History
5.7 History 5.7.1 Readout history The history provides information of the past about the lock and app. Read out the history of a lock: Choose a lock Enter the administrator code of Press the the lock and press the button Menu button Now the history is read out, confirm with "OK". -
Page 53: Lock History
Remove a lock history: 5.7.2 Readout history Lock history Display the history of a lock: Choose a lock Choose a lock Swipe to the left Select the history data that you want to view Fig. 1 Fig. 2 Fig. 1 Fig. 2 Executed Procedure Date &... -
Page 54: Keyapp History
5.7.3 KeyApp history Display KeyApp history: Remove KeyApp history: Choose your production series Date & Choose your product Select time Swipe to the left history file Procedure Lock Result Fig. 3 Fig. 4 Fig. 1 Fig. 2 Fig. 1 5.8 Firmware update With firmware updates, you can keep our products up-to-date. -
Page 55: Settings
5.9 Settings In the settings, a password can be selected to protect the app, and an administrator code can be set for all devices. Moreover, you can decide is anonymised data should be sent to BURG-WÄCHTER, which are used to improve the app. You can also view information such as, the version of the app. -
Page 56: Password
5.9.1 Password 5.9.3 I want to help Protect the app with an additional 4 digit password. With this function, you send anonymised data to BURG-WÄCHTER and thus help to improve the app. Switch on the function Switch on the function 4 digit password Fig. - Page 57 Version info: Licence provisions: Imprint The copyright for these operating instructions are held exclusively by BURG-WÄCHTER KG. Any reproduction, even into digital storage media requires the written consent of BURG-WÄCHTER KG. Reprinting, even excerpts, is forbidden. Subject to errors and technical changes. ©...
- Page 58 secuENTRY KeyApp - iOS BURG-WÄCHTER KG BURG-WÄCHTER UK LTD Altenhofer Weg 15 Eurocam Technology Park 58300 Wetter Chase Way, Bradford, West Yorkshire Germany England BD5 8 HW www.burg.biz www.burg.biz www.burg.biz...