Surround Loudspeaker
With great looks and advanced
technology, the Icon V Series VS-14
surround speaker serves up enveloping
cinema-style sound that definitely brings a
new dimension of reality and convenience
to home theater.
The VS-14 employs a 4.5" fiber-
composite woofer cone that is
lightweight, yet powerful. Not only
does this reliable low-frequency
component create improved tonal
balance and imaging, it also generates
amazing dynamics and deep bass.
Even more remarkable is the VS-14's
all-new, patent-pending Tractrix
loaded tweeters with XT technology.
This proprietary design equalizes the
speed of sound waves from the horns and
smoothes the dispersion pattern.
Furthermore, the exclusive Wide
Dispersion Surround Technology, or
WDST, that's tied in with the tweeters
and horns allows the VS-14 to create a
smooth, high dispersion pattern, providing
crystal clear sonic detail even in listening
areas with less than ideal configurations.
So, no matter where you sit, this surround
speaker promises to draw you into the
middle of the action.
The speaker's sleek, black cabinet has a
stylish look that complements modern
video and audio components. And, with
the furniture-grade finish on the top and
bottom caps, it will look great in
any room.
VS-14
• Patent-pending XT Tractrix
• Dual tweeters create precise high frequencies
• High-output woofer generates hard-hitting lows
• High-style, contemporary black cabinet fits any décor
• Fixed grille protects drivers
• Easy to drive with typical A/V receiver
S p e c i f i c a t i o n S
frequency response
low frequency extension
power handling
sensitivity
nominal impedance
crossover frequency
Horn-
®
drive components
enclosure material
enclosure type
height
width
depth
weight
finishes
All specifications are subject to change without notice. ©2008
Horns with wide dispersion technology
®
99Hz - 23kHz +/- 3dB
92Hz
50 W continuous, 200 W peak
89dB
8 ohms compatible
2000Hz
Two-way system utilizing one 4.5"
fiber-composite lightweight cone
woofer and two 1" aluminum
dome tweeters mounted in dual
4.5" square 90° X 90° XT Tractrix
horns in a WDST configuration
MDF (medium density fiberboard)
Sealed enclosure
6.75" (17.1 cm)
15" (38.1 cm)
6.5" (16.5 cm)
7.5 lbs (3.4 kg)
Black vinyl with furniture-grade black
wood veneer top and bottom cap
www.klipsch.com
1-800-KLIPSCH
®
Need help?
Do you have a question about the Icon V Series and is the answer not in the manual?
Questions and answers