Table of Contents
Advertisement
not immerse the product in water, the product is not waterproof.
Disinfection of the product: wipe the surface of the product gently with a cotton swab dipped in a little medical
alcohol (70%), wipe once or twice and use it after the alcohol has completely evaporated.
2. Cleaning and disinfecting environment
Temperature :5℃～40℃ 41℉～104℉
Humidity ：30-90%RH
Atmospheric Pressure ：70kPa-106kPa
3. Storage
Before storing, dry it and keep it out of reach of children.
Remove the battery if you do not use the product for a long time.
Keep the product in a safe and dry place. Avoid sun exposure, extreme heat, cold, or humidity.
Please do not shock the product, such as dropping it to the floor.
Please use the product in strict accordance with the instructions and instructions in this operation guide.
Note: It takes 4 hours for the equipment to return to normal operation after being transferred from the lowest
storage ambient temperature to an ambient temperature of 20 ° C
It takes 4 hours for the equipment to return to normal operation after being transferred from the highest
ambient storage temperature to an ambient temperature of 20 ° C
十、Trouble-shooting
：Returns "FAIL" if the user is trying to network the product:
1. Please check the case of your Wi-Fi password and the way you write special characters.
2. Check your router
2.1 Users are requested to keep mobile phones, body fat scales and routers as close as possible and avoid using
them in a wall environment
2.2 The signal of portable Wi-Fi is generally unstable, so it is not recommended to use it
3. If "FAIL" is returned when data is uploaded through WIFI after the product measurement is completed: please
check whether the network used by the device is in an abnormal or unstable state
：Weight overload
：When the product displays "LO", it means the battery power has been used up. Please replace the
battery in time.
：The device is undergoing an OTA upgrade. Please do not force it to shut down
十一、Standard List
Shenzhen Yolanda Technology Co.,Ltd. declares that the Body Composition Analyzer complies with following
applicable standards:IEC 60601-1,IEC 60601-1-2,IEC 60601-1-11,ISO 10993-1,ISO 10993-5,ISO 10993-10 and
1
Advertisement
Table of Contents
