Kenwood VR-8060 Instruction Manual page 32

Ambience effects
Dual Mono mode (Dolby Digital mode only)
When the Dolby Digital source have Multiplex sound, you can select
Main / Sub sound for Audio output.
1 Press the SOUND key, then press the ∧ ∧ ∧ ∧ ∧ / ∨ ∨ ∨ ∨ ∨ keys or @/# keys until
"DUAL MONO" appears on the display.
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3
is selected as the source and the input signal is set to "Dolby Digital."
2 Use the MULTI CONTROL knob or Multi (%/fi) keys for the
following selection.
1 Main
: Multiplex Main channel output.
2 Sub
: Multiplex Sub channel output.
3 Main + Sub : Multiplex Main + Sub channel output.
4 Stereo
: Main channel from the left speaker. / Sub
channel from the right speaker.
OPTICAL 6CH INPUT
LFE
• The adjustment item is displayed for approximately 20 seconds.
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L R
LFE
SP
A
L R
SP
A
L R
32
EN
CINEMA EQ. DTS. DOLBY DIGITAL NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
DOLBY DIGITAL
PRO LOGIC
DOLBY DIGITAL STEREO
PRO LOGIC
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode other than DSP mode.
• When in FULL AUTO input mode and the listen mode is set to DSP
mode, the listen mode will automatically be STEREO.
• When in DIGITAL MANUAL input mode and the listen mode is set to
DSP mode, "96kHz LPCM" will appear in the display and no sound can
be heard from the speakers.
Use the LISTEN MODE knob or STEREO key to select STEREO mode
to output sound from the speakers.