Summary of Contents for JFA Electronicos X-Line 40A
- Page 1 User manual p o w e r s u p p l y a n d b a t t e r y c h a r g e r The best source, so far.
- Page 2 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL PRESENTATION The X-Line Sources and Chargers of 40A, 60A, 70A, 120A, 150A and 200A are high-power supplies, in super compact format "SLIM", which allow to power and charge automotive batteries. They provide a maximum current of 40A, 60A, 70A, 120A, 150A and 200A at their output, respectively, and operate in 3 intelligent modes that manage battery charging.
- Page 3 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL PHASE 1 PHASE 2 PHASE 3 CURRENT CONSTANT MAXIMUM CONSTANT VOLTAGE LOAD PULSATING EQUALIZATION ELEVATION ABSORPTION During phase 1 (LIFTING) the battery current is limited to a maximum of 20% of the current of the previously configured battery bank;...
-
Page 4: Main Features
X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL COMFORT SMART COOLER: X-LINE sources feature an intelligent ventilation system with dynamic PWM control. When the source is turned on, the fan initiates a gradual acceleration, reduces the rotation to the appropriate value, and adjusts to the source's need. There is also a decrease in noise level, maintaining cooling and increasing the life of fans. -
Page 5: Installation And Connections
X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL DASHBOARD FROM CONTROL CONTROL PANEL PAINEL DE CONTROLE BATTERY CHECK-UP CHECK-UP DA BATERIA VOLTAGE AMPERAGE TENSÃO CORRENTE SLOW CHARGE PHASES CARGA LENTA READING SELETOR LEITURA SELECTOR 1. ELEVAÇÃO 1.ELEVATION MEDIDOR CCA - Ri m 2. - Page 6 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL Each Source 40A, 60A, 70A, 120A, 150A and 200A can power about 2,000, 3,000, 3,500, 6,000, 7,500 and 10,000 Wrms of sound playing respectively, provided that a parallel battery is used to supply the peak consumption. When connecting to the batteries, observe the correct polarity of the connection and use the appropriate cable gauge, according to the MINIMUM GAUGE table OF THE CABLES FOR CONNECTION (see page 11).
-
Page 7: Operating Modes And Functions
X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL OPERATING MODES AND FUNCTIONS MODE (REDLINE) SLOW LOAD - Smart Slow Load To use Smart Slow Load mode, press the SELECTOR MODE until the LED indicative Of LOAD SLOW Light. Press a key SELECTOR BATTERY e Select a capacity, in amperes, of the battery to be charged. - Page 8 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL THE AUTO SCI allows the battery to absorb a greater amount of charge and prevent excessive elevation of the potential of the plates, a chemical phenomenon caused by load stress (electrolysis), increasing the life and e ciency of the batteries. OUTPUT VOLTAGE MODE (Fixed Source Mode) To use in FIXED OUTPUT VOLTAGE mode, press the SELECTOR switch MODE until the LED VOLTAGE OUTPUT turns on.
- Page 9 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL CCA METER FUNCTION (Cold Start Current Meter) To perform CCA measurement, simultaneously press the SELECTOR READING and SELECTOR MODE keys. CONTROL PANEL PAINEL DE CONTROLE PAINEL DE CONTROLE BATTERY CHECK-UP CHECK-UP DA BATERIA CHECK-UP DA BATERIA VOLTAGE TENSÃO...
- Page 10 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL Connect the battery to the charger and wait the indication light BATTERY LOADED (charging time may vary depending on battery capacity and the source used). Read in display a quantity from Amps than a battery Accumulated during o process from load. Verify the value obtained is close to the amount of amperes specified by the battery manufacturer (e.g.
-
Page 11: Technical Specifications
35mm2 150A 200A 3000W 6mm2 50mm2 200A TECHNICAL SPECIFICATIONS X-LINE 40A 90 to 140Vac / 170 to 240Vac (Automatic Bi-volt) AC input Consumption with maximum load 600W Maximum output current 40 Amperes Selectable output voltage 12,6V / 13,0V / 13,4V / 13,8V / 14,0V / 14,4V... - Page 12 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL X-LINE 70A AC input 90 a 140Vac / 170 a 240Vac (Automatic Bi-volt) Consumption with maximum load 1050W Maximum output current 70 Amperes Selectable output voltage 12,6V / 13,0V / 13,4V / 13,8V / 14,0V / 14,4V SCI - Intelligent charging system 13,8 / 14,4 cyclic 3-phase slow load system - Customizable...
- Page 13 X-LINE SOURCES AND CHARGERS - INSTRUCTION MANUAL X-LINE 200A AC input 90 a 140Vac / 170 a 240Vac (Automatic Bi-volt) Consumption with maximum load 3000W Maximum output current 200 Amperes Selectable output voltage 12,6V / 13,0V / 13,4V / 13,8V / 14,0V / 14,4V SCI - Intelligent charging system 13,8 / 14,4 cyclic 3-phase slow load system - Customizable...