Westfalia SW-01 Instruction Manual page 8

Before first Use
Remove all packaging from the shoe warmer. Keep packaging out of reach of
small children. There is risk of suffocation!
Mounting the Shoe Warmer
To mount the shoe warmer on the wall, use the 4 provided fixing holes and the
enclosed mounting parts or other mounting parts that are suitable for the resp.
surface.
Operating
Please note that very smooth leather might become brittle and crack after drying
on the shoe warmer. Allow smooth leather to air dry only.
1. Connect the power plug with an earthed wall socket. Press the ON/OFF
switch in direction to I. The indicator light turns on and shows that the unit is
switched on.
2. Hang the shoes on the hanging arms and leave the shoes to dry. After
several hours check if the hoes are already dry.
3. After drying the shoes resp. boots, remove them and switch off the unit by
pressing the ON/OFF switch in direction to O. Afterwards, pull the power cord
from the wall socket.
Cleaning and Storing
Pull the power plug and allow the unit to cool down before storing.
Wipe the surface of the unit with a lightly moistened cloth. Use detergent as
needed. Do not clean the unit with aggressive chemicals or abrasives in order
not to damage the surface.
Do not immerse the shoe warmer into water.
Allow the shoe warmer to cool fully before storing it.
Using
3