Download Print this page

Breville the BodyZone Plus Connect Instruction Book page 16

Fitted heated blanket

Advertisement

2. To set up a virtual controller, slide the
control switch of the heated blanket's
controller (physical controller) from 'OFF' to
'AUTO'. On the 'AUTO' setting the physical
controller will allow for Wi-Fi connection,
as well as act as a memory or favourites
function (see 'USING THE AUTO
SETTING' on page 14).
NOTE
When using the MANUAL function, the
heated blanket can be controlled by the
buttons on the physical controller only.
The app will not operate under the manual
function.
NOTE
The heated blanket can only be switched to the
'OFF' position on the physical controller, not
through the mobile app virtual controller.
3. Press and hold the ENTER button for
5 seconds until the Wi-Fi symbol flashes
fast on the controller.
4. Log into your Breville Home Connect™
app account and stay on the "Home" page.
To add the controller to the list, touch 'Add
Device' or the symbol found in the top
right-hand corner of the screen. Follow the
prompts in the app.
16
5. If the connection is successful, the
controller will appear in the main page of
the app and the
symbol light on the
controller will illuminate.
6. If connection is unsuccessful, touch and
hold the ENTER button for 5 seconds until
the
symbol is flashing slowly. Follow the
prompts in the app to connect in a different
mode.
BLUETOOTH
Bluetooth connectivity is an added feature of
the Breville Home connected blankets.
When the
is flashing fast when attempting
to connect, the Breville Home Connect™ app
should quickly recognise the unit without
having to complete extra prompts. Refer to the
Quick Start Guide in the box or on Breville.
com for specific details on how to connect
through Bluetooth.
NOTE
The physical controller is connected when the
Wi-Fi symbol displays on the screen. If there
is an exclamation mark (!) next to the Wi-Fi
symbol and an error prompt displays on the
app, then the connection with the home Wi-Fi
network has failed. Make sure your Wi-Fi
is enabled and within range before trying
again or press and hold the ENTER button to
attempt pairing again.

Advertisement

loading