Summary of Contents for Yard force LT V12
- Page 1 LT V12 CORDLESS GRASS SHEAR Original Instructions READ & UNDERSTAND INSTRUCTION MANUAL Save all warnings and instructions for future reference.
-
Page 2: Table Of Contents
LT V12 Original Instruction CONTENT Intended use General safety warnings Product safety warnings Symbols Technical data Description of product Installation Operation Maintenance and storage Troubleshooting Declaration of conformity... -
Page 3: Intended Use
INTENDED USE GENERAL SAFETY WARNINGS Electrical safety This cordless grass shear is designed for the cutting and trimming of grass, hedges, bushes and ornamental shrubs in the domestic environment. 1. Power tool plugs must match the outlet. Never modify For safety reasons it is essential to read this entire instruction manual before initial operation and to observe all the instructions inside. - Page 4 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Personal safety 7. If devices are provided for the connection of dust 1. Stay alert, watch what you are doing and use extraction and collection facilities, ensure these common sense when operating a power tool. Do are connected and properly used.
- Page 5 GENERAL SAFETY WARNINGS GENERAL SAFETY WARNINGS Service less likely to bind and are easier to control. 1. Have your power tool serviced by a qualified repair 7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into person using only identical replacement parts.
-
Page 6: Product Safety Warnings
PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS Special Safety Directions for cordless grass shear Further safety directions 1. Keep all body parts away from the blade. Do not 1. Only switch on the tool when hands, feet and all attempt to remove clippings while the blade is other body parts are at a secure distance to the tool. -
Page 7: Symbols
PRODUCT SAFETY WARNINGS SYMBOLS Safety symbols 8. Never allow children, persons with reduced physical, The purpose of safety symbols is to attract your attention sensory or mental capabilities or lack of experience to possible dangers. The safety symbols and the and knowledge or people unfamiliar with these explanations with them require your careful attention instructions to use the machine. - Page 8 SYMBOLS SYMBOLS Symbols on the battery pack Read the user manual before using the machine. Warning! Danger! Do not dispose of a battery pack in water! Guaranteed sound power level value in 92 dB. Do not set on fire to dispose! WEEE symbol.
-
Page 9: Technical Data
TECHNICAL DATA DESCRIPTION OF PRODUCT Parts description (Fig. A) Type LT V12 ON/OFF trigger Degree of Protection IP X1 Working head release button Cutting length (shrub trimming blades) 120 mm Grass trimming blade Cutting width (grass trimming blades) 80 mm... -
Page 10: Installation
INSTALLATION OPERATION Charging the battery pack WARNING: Wear protective gloves before doing any operation. WARNING! Do not use other charging wires which are not recommended by the manufacturer. NOTE : Make sure the battery pack is removed before any adjustments are NOTE: The battery is supplied partially charged. -
Page 11: Maintenance And Storage
MAINTENANCE AND STORAGE OPERATION To switch ON: WARNING: Wear protective gloves before doing any operation. Push lock-off button forward and depress the switch trigger. Release the lock-off button. Maintenance Always switch the product off, disconnect the battery pack and let the product cool down before performing inspection, maintenance and cleaning work. -
Page 12: Troubleshooting
Contact service center Declare that the product: Machine Description: Cordless Grass shear Battery pack not fully inserted Remove and reinsert battery pack Machine Type: LT V12/ HT03B-ZA Function: Trimming grass Remove blade and reassemble High vibration Blades jammed Check blades are clear of debris... -
Page 13: Declaration Of Conformity
MEROTEC GmbH Otto-Brenner-Str. 8, 47877 Willich Germany Declare that the product: Machine Description: Cordless Grass shear Machine Type: LT V12/ HT03B-ZA Function: Trimming grass Complies with the essential health and safety requirements of the following directives: Machinery Directive 2006/42/EC Electromagnetic Compatibility Directive 2014/30/EU...