Page 1
1in. Clear Water Pump OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 109955...
Page 2
Thank you very much for choosing a Wel-Bilt product! For future reference, please complete the owner's record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
Page 3
GENERAL SAFETY RULES This pump has been evaluated for use with water only. NOTE: This pump is supplied with a grounding conductor and grounding- type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding type receptacle.
Page 4
• Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still doesn't fit, contact a qualified electrician to install a polarized outlet.
Page 5
• Avoid accidental starting. Ensure the switch is in the off position before plugging pump into power outlet. In the event of a power failure, while a pump is being used, turn the switch off to prevent surprise starting when power is restored. •...
Page 6
3. Do not allow pump to run dry. 4. If flow of water to pump inlet is restricted such as when used with a control valve: Do not run pump continuously; run at intervals (turn the pump off for 10 minutes after the pump runs continuously for 1 hour).
Page 7
MAINTENANCE In ordinary conditions, this pump does not require any maintenance. It may be necessary, however, to clean the hydraulics or replace the impeller. WARNING: Make sure the pump is disconnected from electric power supply before performing any maintenance operation. •...
Need help?
Do you have a question about the 109955 and is the answer not in the manual?
Questions and answers