Table of Contents
Advertisement
Quick Links
Residential
Water Softener System
Models
WSS-0948-R WSS-1252-R
Owner's manual
Manufacturing Numbers:
9720010 & 9720011
Tested and Certified by the
WQA to NSF/ANSI
44 & 372 for softener
performance & lead free
compliance and CSA B483.1
Original Instructions
www.antuneswater.com
P/N 1011598 Rev. A 11/20
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Antunes WSS-0948-R
Summary of Contents for Antunes WSS-0948-R
- Page 1 Residential Water Softener System Models WSS-0948-R WSS-1252-R Owner’s manual Manufacturing Numbers: 9720010 & 9720011 Tested and Certified by the WQA to NSF/ANSI 44 & 372 for softener performance & lead free compliance and CSA B483.1 Original Instructions www.antuneswater.com P/N 1011598 Rev. A 11/20...
-
Page 2: Table Of Contents
If any parts are missing or damaged, operating the system. Equipment Information to Save problems with the installation or operation of this product contact Antunes Customer Important Safety Information This system is manufactured from Service immediately toll free at Specifications the finest materials available and is +1-877-392-7856. -
Page 3: Important Safety Information
Water hammer occurs in pipes when a only. Contact Antunes valve or faucet shuts quickly. Install a Technical Service for repair. Protect from rough handling or... -
Page 4: Specifications
Specifications Drain must accommo- Model & Width Depth Height Height Operating Model date flow up to: Mfg. No. Weight WSS-0948-R WSS-0948-R 2 gpm 9” 57” 125 lbs. 9720010 (23 cm) (145 cm) (57 kg) Resin Pressure Tank WSS-1252-R 3.5 gpm WSS-0948-R 18”... -
Page 5: Water Softener Performance Data
RESIDENTIAL WATER SOFTENER Water Softener Performance Data Sheet Model WSS-0948-R WSS-1252-R Maximum Rated Service Flow (gpm) 11.5 (W/upper collector) Pressure Drop at Rated Service Flow Rate (gpm) Rated Capacity 18,000 @ 4.0 35,900 @ 8.0 (Grains @ lbs of salt) 27,800 @ 9.0... - Page 6 RESIDENTIAL WATER SOFTENER THIS PAGE LEFT INTENTIONALLY BLANK P/N 1011598 Rev. A 11/20...
-
Page 7: Installation
NOTE: If any parts are damaged, System Inlet 1” NPT Male contact Antunes Technical Attach the control head to the Service IMMEDIATELY at: resin tank by screwing it onto the System Outlet 1” NPT Male +1-877-392-7854 (toll free). -
Page 8: Drain Connection
RESIDENTIAL WATER SOFTENER Setting the Clock Drain Connection Attach 3/8” OD brine tank tubing to the control head using the brass Program the controller to set the time of The drain is for regenerating the softener nut and sleeve provided. Do NOT day. -
Page 9: Maintenance
RESIDENTIAL WATER SOFTENER Maintenance Every Month Every Five Years Check Clock Time Replacing the Softener Resin Every Week Tank The clock should be checked monthly to Checking Salt Levels make sure the local time is set properly. Consult the factory for replacement of the NOTE: Abrasive ‘hard’... -
Page 10: Master Programming
RESIDENTIAL WATER SOFTENER Figure 3. Softener Controller Master Programming Resets Master Programming Soft Reset Instructions Press and hold the Extra Cycle and Down buttons for 25 seconds When the Master Programming Mode is while in normal Service mode. entered, all available option setting displays may be viewed and set as This resets all parameters to the needed. - Page 11 RESIDENTIAL WATER SOFTENER NOTE: THE FOLLOWING PARAMETERS ARE FACTORY DEFAULTS AND SHOULD ONLY BE CHANGED BY A QUALIFIED SERVICE PROFESSIONAL. Factory Default Abbreviation Parameter Description WSS-0948-R WSS-1252-R Display Format Gallons Standard Down-Flow Valve Type DF1b DF1b Single Backwash Control Type...
-
Page 12: Troubleshooting
RESIDENTIAL WATER SOFTENER Troubleshooting Problem Possible Cause Corrective Action Inlet/Outlet valves closed. Open the Inlet/Outlet valves. Regeneration timer is not set. Set regeneration timer. No water comes out of the filter system. Check incoming water pressure to ensure that it meets Water pressure is too low. -
Page 13: Replacement Parts List
RESIDENTIAL WATER SOFTENER Replacement Parts List (See Exploded Views for more information) NOTE Use only genuine Antunes replacement parts in this unit. Use of parts other than those supplied by the manufacturer will void the warranty. Item # Part # Description Qty. -
Page 14: Exploded View
RESIDENTIAL WATER SOFTENER Replacement Parts Exploded View #1 P/N 1011598 Rev. A 11/20... -
Page 15: Notes
RESIDENTIAL WATER SOFTENER NOTES P/N 1011598 Rev. A 11/20... -
Page 16: Limited Warranty
Antunes reserves the right to make changes in design or add any improvements on any product. The right is always reserved to modify equipment because of factors beyond our control and government regulations.
Need help?
Do you have a question about the WSS-0948-R and is the answer not in the manual?
Questions and answers