JVC WIDE LCD PANEL TV LT-26A61BJ Instructions Manual page 96

This TV is compatible with the following PC
signals.
Resolution Vertical
frequency
(Hz)
640 × 480
60.0
(VGA)
1024 × 768
60.0
(XGA)
• Only the above formats are supported.
• Even with the above formats and at 60 Hz,
some problems may be experienced
depending on the quality of the
synchronous signal. (Depending on the
quality, some pictures may not be
displayed properly.)
• Apple Macintosh* computers are not
supported.
When a picture is not displayed
Check the computer's refresh rate and set it
to 60 Hz. Refer to the computer's instruction
manual. Computers which cannot have their
refresh rate set 60 Hz cannot be used with
this unit.
* Apple Macintosh is a registered trademark
of Apple Computer, Inc.
Connecting to the HDMI or DVI
compatible device
Connect the HDMI-DVI converter cable
Horizontal
from the HDMI terminal on the back of your
frequency
HDMI compatible device to the DVI
(kHz)
terminal on the back of the TV and audio
31.5
cable from the audio output from HDMI
compatible device to the VIDEO-3 AUDIO
42.0
L/R terminal on the back of the TV.
To watch the images from a HDMI/DVI
compatible device, press the G or p p
buttons to choose "DVI".
The DVI of the TV is compatible with the
following video signals.
Additional preparation
• To connect the DVI compatible device to
the DVI terminal, connect the DVI
terminal of the DVI compatible device to
the DVI terminal of the TV with the DVI
cable.
• Ensure that the connectors are facing the
correct way when connecting.
• After connecting the DVI-HDMI
converter cable or DVI cable, tighten the
two screws to fix the connector in place.
• Digital audio output from HDMI terminal
is not supported.
VGA/60Hz
480i/60Hz (525i/60Hz)
480i/60Hz (525i/60Hz)
480p/60Hz (525p/60Hz)
576i/50Hz (625i/50Hz)
576i/50Hz (625i/50Hz)
576p/50Hz (625p/50Hz)
576p/50Hz (625p/50Hz)
720p/50Hz (750p/50Hz)
720p/60Hz (750p/60Hz)
1080i/50Hz (1125i/50Hz)
1080i/60Hz (1125i/60Hz)
4:3
4:3
16:9
16:9
4:3
16:9
4:3
16:9
16:9
16:9
16:9
16:9
43