Do you have a question about the TR460 and is the answer not in the manual?
Questions and answers
Summary of Contents for Turfware TR460
Page 1
Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death. Keep this manual in a safe location for future use. www.turfware.com 1049 McCauley Road • Stow, Ohio 44224 • Phone: 330-929-9000 • 1-800-637-4000...
SAFETY SYMBOLS – IN THIS MANUAL…………………………………………………………….5 SAFETY LABLES – ON THE MACHINE…………………………………………………………..…6 WARNINGS AND PRECAUTIONS……………………………………………………………………7 WARNINGS AND PRECAUTIONS CONTINUED………………………………………………...…8 PRODUCT OVERVIEW…………………………………………………………………………….9-12 TR460 USE AND CARE………………………………………………………………………………13 STARTING AND STOPPING THE TR460 ENGINE……………………………………………….13 SPREADER OPERATION………………………………………………………………………..14-15 OPERATING THE SPRAYER……………………………………………………………………15-16 SPRAY-SPREAD PATTERNS……………………………………………………………………….17 APPLICATION CALIBRATION RATES……………………………………………………..………18 SERVICE PATH EXAMPLE…………………………………………………………………………..19 GREASE MAINTENANCE…………………………………………………………………………...20...
Page 3
2- Hold your device so the code is visible on the screen. 2- Hold your device so the code is visible on the screen. 3- Click the link when it pops up. 3- Click the link when it pops up. Page 3 TR460-12/21 TR460-12/21 TR460-12/21...
Introduction Congratulations on the purchase of your TR360 ride-on spreader and sprayer from Turfware Equipment Com- pany. We look forward to working with you and your organization to help meet your turf maintenance goals for years to come. The TR360 Operator’s Manual is part of this machine and must be available to the operator at all times.
Safety Labels - On the Machine Safety labels found on your TR460 are illustrated in this section. Always follow their instructions and heed their warnings. Safety labels found on your TR460 are illustrated in this section. Always follow their instructions and heed their warnings.
Page 6
Airborne particles WARNING and loud noise hazards Spinning impellar Wear ear and eye can cause protection. serious injury Keep hands clear. WARNING Pinch points. Moving parts can crush or cut. Keep hands clear. HOT SURFACE Do Not Touch Page 6 TR460-12/21...
• Keep the machine, and especially the engine/transmission area, clean and free of grease, grass and leaves to reduce the potential for overheating and fire. • Do not exceed the hopper capacity of 250 lbs. Page 7 TR460-12/21...
Page 8
Before operating the machine check for worn tires. Tires with excessively worn tread are dangerous on slopes or inclines. Replace as needed. • Always maintain the tire pressure at max PSI of 22 lbs. Do not under or over inflate the tires. Page 8 TR460-12/21...
Page 12
32 - Spray Pump 33 - Battery 34 - Spray Tank Shut-off Valve 35 - Spray System Filter Housing/Clean- 36 - Hopper Slide Shutoff and Flow Assembly 37 - Self Aligning Cap and Nozzle 38 - Serial Number TR460-12/21 Page 12 TR460-12/21...
Page 13
Refer to the Honda Owner's Manual, included separately with your machine, for more information about engine pre-checks and star ting/stopping the engine Starting the TR460 Engine WARN I NG Before starting the engine engage the parking brake to avoid injury.
When spreading material fully engage the drive bar or operate at your own application speed.. Refer to the TR460 calibration sheet for more information about granular application. 1) Fill the hopper with material. Do not exceed the maximum hopper weight capacity of 250 lbs.
Page 15
NOTE: The sprayer unit and the spreader unit can be operated at the same time to provide an even distribution of both the sprayed and spread products to an area. Refer to the TR460 Calibration Sheet on Page 18 for more information about the liquid application. Page 15...
5) For long-term storage in freezing conditions add an RV type of anti-freeze and cycle it completely through the spray system. Refer to the Honda Owner's Manual, included separately with your machine, for more information about proper long-term storage of the engine. MAINTENANCE AND STORAGE - DAILY TR460-12/21 Page 16 TR460-12/21...
This will ensure that the applicator knows the rates of application used throughout the day and can make the fine turned adjustments as needed. EVERY OPERATOR APPLIES PRODUCT DIFFERENTLY. MAKE SURE THE MACHINE OPERATOR VERIFIES THEIR PERSONAL USE RATES ON AN ONGOING BASIS. EVERY DAY IS DIFFERENT. Page 18 TR460-12/21 TR460-12/21...
Page 19
Example Service Path Example Service Path TR460-12/21 Page 19 TR460-12/21...
Please do your part! You can ensure years of uninterrupted life from your TR460 by simple greasing the Front Wheel Bearing Hubs and adjusting and greasing the Pivot Point.
Page 21
NOTE: Please dispose of used motor oil in a manner that is compatible with the environment. Do not throw it in the trash or pour it on the ground. TR460-12/21 Page 21 TR460-12/21...
Check the entire hydraulic system for leaks and make necessary adjustments. If you need to push or tow the TR460, release the valve on top of the hydraulic pump. (A hex head with a hole running through it.) Turn the hex head counter-clockwise 1 to 2 turns.
Maintenance Record Refer to the Honda Owner’s Manual, included separately with your machine, for detailed information about engine maintenance procedures and maintenance intervals. Page 23 TR460-12/21...
Page 27
DO NOT use this machine unless you have been instructed in its safe use and operation and have been given permission Page 27 TR360 03/21 Rev.2...
Page 28
TR360 AND TR460 HONDA GX390 PARTS Item Part Number Description 3607012 Engine, Honda GX390 OUT2 QNR2, 18 Amp 3607001 Engine, Honda GX390 OUT2 QNE2, 10 Amp 3607010 Honda GX390 Spark Plug 3607011 Honda GX390 Air Filter 3601078 Honda GX390 Gas Cap...
Page 29
TR460 AND TR460XL MAIN PIVOT (V1) Page 29 TR460-12/21 TR460-12/21 Sheet 1 of 2...
Page 30
TR460 AND TR460XL MAIN PIVOT (V1) Assy, Main Pivot (V1) TR460 ... PN XXXXXXX Item Part Number Description XXXXXXX Weldment, Rear Pivot XXXXXXX Assy, Front Pivot XXXXXXX Weldment, Front Pivot 3606052 Bearing Race, 15243 3601060 Grease Fitting, 1/8"-27 MPT, Straight Ball Check...
Page 31
TR460 FRONT AXLE WITH PIVOT Axle Pivot on Front Chassis See Hub Detail� on Sheet 2 Patent Pending TR460-12/21 TR460-12/21 Page 31...
Page 33
TR460 FRONT AXLE WITH PIVOT Item Part Number Description 3606425 Assy, Front Axle, TR360 3606429 Weldment, Front Axle, TR360 3606014 Bearing Race, L446 l O 3606021 Tapered Roller Bearing, l" Shaft, L44643 3606625 Pivot Washer Seal, TR360 3606028 Assy, Axle Pivot Shaft 3606018 Castle Nut, Slotted, l "-14 THRO...
Page 34
TR460 CONTROL CABLES HARDWARE & ITEM PART NUMBER DESCRIPTION TR460 CONTROL CABLES HARDWARE & 3609007 CABLE, HOPPER SLIDE CONTROL ITEM PART NUMBER DESCRIPTION 3606110 CABLE, DEFLECTOR CONTROL 3609007 CABLE, HOPPER SLIDE CONTROL 3609006 CABLE, DRIVE CONTROL 3606110 CABLE, DEFLECTOR CONTROL 3601050 ROD END, l /4"...
Page 35
TR360 AND TR460 HOPPER COMPONENTS Patent Pending 17 4X 12 4X 15 9X Sheet 1 of 2 16 9X Page 35 TR460-12/21 TR460-12/21 Sheet 1 of 2...
Page 38
TR460 HYDRAULIC SYSTEM Main Drive Circuit TR460-12/21 TR460-12/21 Page 38...
Page 39
TR360 AND TR460 HYDRAULIC SYSTEM 4X PER HUB Rear Hub/Wheel Detail (Typical LH & RH Hubs) TR460-12/21 TR460-12/21 Page 39...
Page 40
TR460 HYDRAULIC SYSTEM TR460 HYDRAULIC SYSTEM Item Part Number Description Item Part Number Description 3609003 Assy, Impeller Motor w/Fittings 3609003 Assy, Impeller Motor w/Fittings 3605010 3605010 Hydraulic Impeller Motor Hydraulic Impeller Motor 3605051 Adapter, 3/8" x 1 /4" Flared, SST 3605051 Adapter, 3/8"...
Page 41
TR460 IMPELLER COMPONENTS See Seperate Parts Diagram for Nose Cone Components TR460-12/21 Page 41 TR460-12/21...
Page 42
TR460 IMPELLER COMPONENTS Item Part Number Description 3609003 Assy, Impeller Motor w/Fittings 3605010 Hydraulic Impeller Motor 3605051 Adapter, 3/8" x /4" Flared, SST 3605042 Tee, 1 /4" Flared x 3/8" x 1 /4" Flared, SST 3609004 Assy, Impeller Motor Seal Kit...
Page 43
TR360 AND TR460 NOSE CONE TR460-12/21 TR460-12/21 Page 43...
Page 44
TR360 AND TR460 NOSE CONE Assy, Nose Cone ... PN 3608675 Item Part Number Description 3608706 Weldment, Nose Cone 3608685 Support Bracket, Spray Bar {LH) Support Bracket, Spray Bar {RH) 3608690 3608504 Spray Bar 3608705 Nose Cone Cover Plate 3601031 Carriage Bolt, 3/8"- l 6 x l"...
Page 46
Turfware, Inc 2-year Worry Free Parts Warranty Turfware, Inc (the “Company”) warrants its equipment and parts to be free of defects in materials and workmanship for a period of two years from the date of purchase, subject to the simple terms below.
Need help?
Do you have a question about the TR460 and is the answer not in the manual?
Questions and answers