6.Quality
6.1 Inspection AQL
Total of Major Defects
Total of Minor Defects
Sampling Method
6.2 Test Conditions
1) Ambient Temperature : 25±5°C
2) Ambient Humidity
3) Illumination
4) Viewing Distance
5) Inspection Angle
6.3 Dimensional Outline
The products shall conform to the dimensions specified in 2.3.2.
Definition of Major and Minor defects are as follows.
Item
Important Dimensions
Others
Toshiba Matsushita Display Technology Co.,Ltd
Specification No. TENTATIVE
: AQL 0.65 %
: AQL 1.5 %
: ISO 2859-1:1999(level II)
: 65±20%(RH)
: Approximately 500 lx under the fluorescent lamp
: Approximately 30cm by the eyes of the inspector from the module
: θ =0°, φ =0°
Description
Dimensional outline, Dimensional between
the mounting holes.
Dimensions specified in this specifications
Date: 2008 – 11- 07
Date:
Major
Minor
New No. LTA057A341F-14
Old
-
-
No.
←# Special
←& Addition
Sheet
26
Class
← Change