Table of Contents
Advertisement
GET STARTED
Connect Audio Unit
Insert the included headset connector into the
headset jack on the bottom of the unit.
Ensure connector is fully inserted.
NOTE:
Remove Plastic Film
Prior to use, remove the protective plastic film
layer on the LCD screen.
Turn On
Long press the "Power" button to turn the unit
Press
on. LED light will turn blue and LCD window will
briefly light up.
Assign ID Numbers
Long press MODE button to access SETTING
mode. Single press MODE button to access ID
Setting. Assign a
ID number to each
unique
I D
transceiver from 00 to 08. Press and hold
MODE button to exit Setting options.
NOTE: One unit must be assigned ID
number 00.
Audio unit is now ready to use in default Group 00.
See Operations for more detailed settings.
5
Advertisement
Table of Contents
