Mouser Electronics Oitez DP-M14A Instruction Manual

DP-M14A 3D Stand Pro

Installation

Part List

Thanks for choosing the '3D Stand
manual first in order to have the best experience in using the stand.
In line with the policy of continued development, if there are any amendments on the
appearance, color or assemblies, please refer to the real object. Our company reserves
the right to amend on the specifications and the manual without prior notification.
Installation
1. Please check and ensure all parts are
complete before installation.
A. Holder

3.Camera Fixed Holder Installation

Take out the camera fixed holder
holder into the holder slot
it on the slot , Installation is complete
3
Part List
Flexible part A
This part can be rotated 360° freely.
Microscope
holder

Holder lock

There are two locks
on the holder,
suitable for different
size microscopes.

Amera Fixed Holder

Suitable for different
cameras.
3D Stand Pro – Adjust freely
* Oriental Inspiration Company reserves the right to the interpretation of the manual.
Material: 80gsm woodfree paper 正反印刷
Size: 210x297mm
Instruction Manual
Pro '. We recommend you review this instruction
B. Camera Fixed C. Base
Holder
,Insert the camera fixed
1
,Turn the holder to right to fix
2
.
4
2. Insert the adjustable holder into the hole of the base
then turn the holder to the right to tighten it with the base
Installation is complete
3
1
1
Turn the knob to the left to loosen the
flexible part A, B and C to adjust the holder
in any angle and then turn right to fasten.
佳駿(環球)有限公司
ORIENTAL INSPRIRATION LIMITED
1
.
2
2 3
Flexible part B
This part can be rotated 360° freely.

Knob

Flexible part C
This part can be rotated 360° freely.
DP-M14 A 3D Stand Pro
, and
.
2
3
4