Related Manuals for Hiboy P6
Summary of Contents for Hiboy P6
- Page 1 E-bike P6 USER MANUAL The manufacturer reserves the right to make changes to the product，and update this manual at any time. The manufacturer reserves the right to make changes to the product, and update this manual at any time.
-
Page 2: Table Of Contents
12. NOTES OF CHARGING ·After riding on a rainy day, please clean up the rainwater and sediment immediately 13. DAILY CARE AND MAINTENANCE If you have any trouble with the installation, please contact Hiboy customer service 14. TROUBLE SHOOTING for support: ebike@hiboy.com 15. -
Page 3: Package Contents
The manufacturer reserves the right to make changes to the product，and update this manual at any time. Crank Set Pedal Pedals (R and L) x 2 User manual x 1 Please check package contents carefully, if anything is missing or damaged, please contact Hiboy customer service for support: ebike@hiboy.com... -
Page 4: Installing The Handlebars
2. PRODUCT OVERVIEW 3.INSTALLING THE HANDLEBARS Display Charge Port Battery Lock Disc Brake Disc Brake Motor Kickstand Battery Sensor 1.Shown in figure 1, according to the direction of the arrow, rotate the handle stem towards the front of the bike. 2.Put the handlebar in the handlebar mount and be careful with the wires. -
Page 5: Installing The Front Wheel
4. INSTALLING THE FRONT WHEEL 5. INSTALLING THE PEDALS Spring Spring Skewer End nut Disc brake slot Spring Skewer Left - Riding direction End nut Spring Brake disc Right - Riding direction 1.Identify the Left and Right labels on the pedals. They can only be installed in their own side. INCORRECT INSTALLATION WILL CAUSE DAMAGE. -
Page 6: Installing The Headlight
7. INSTALLING THE SADDLE 6. INSTALLING THE HEADLIGHT Installing tool Headlight hole Hexagon wrench Headlight 1.Shown in Figure 1, insert the screw of the headlight into the headlight hole. 1.Install the saddle according to the picture. 2. Push the saddle down, pull up or push down to adjust the height. 2.Tighten the screw with nut by using the installing tool. -
Page 7: Display Introduction
8. DISPLAY INTRODUCTION 9. HOW TO USE THE DISPLAY, HEADLIGHT & HORN Brake Motor failure Voltage protection Controller failure 1. Press to turn on the display. Your bike will be ON. Press again to turn it off. The display will automatically shut down when there is no operation or riding for 5 minutes. -
Page 8: How To Take Off The Battery
11. HOW TO CHARGE THE BATTERY 10. HOW TO TAKE OFF THE BATTERY 1.Charge the battery on the bike, find the charge port at the bottom of the battery tube. 1. Insert the key and turn 90 degrees clockwise. 2.Take out the battery upwards. 2.Pull out the rubber flap of the charging port and insert the charger output plug into the charging port. -
Page 9: Notes Of Charging
13. DAILY CARE AND MAINTENANCE 12. NOTES OF CHARGING Cleaning 1. Fully charging time may vary from 6 to 7 hours. 1. If you see stains on the bike, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste and brush 2. -
Page 10: Trouble Shooting
14.TROUBLE SHOOTING 15. SPECIFICATIONS Possible Reason ITEM SPECIFICATIONS Symptoms Solutions 1.Insufficient battery power 1.Fully charge the battery Model 2.Disengage brakes 2.Brakes are applied Package Size 59.4*11.4*32.7in / 1510*290*830mm Ebike doesn’ t work 3.Faulty connections 3.Clean & repair connectors Package Weight 82.7lb / 37.5kg 4.Improper turn on sequence 4.Turn on ebike with proper sequence... -
Page 11: Limited Warranty Statement
30 DAY SATISFACTION GUARANTEED RETURN POLICY Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your Hiboy Ebike P6. 1. If you are unsatisfied with your purchase, Hiboy’s return policy allows you to return the product purchased on the...