Download Print this page
Audiofrog A150.4D Manual

Audiofrog A150.4D Manual

4/1-channel high fidelity class-d amplifier

Advertisement

Quick Links

A150.4D
4-Channel High Fidelity Class-D Amplifier
A600.1D
1-Channel High Fidelity Class-D Amplifier
A150.4D
High Fidelity Class-D Amplifier

Advertisement

loading
Need help?

Need help?

Do you have a question about the A150.4D and is the answer not in the manual?

Questions and answers

Summary of Contents for Audiofrog A150.4D

  • Page 1 A150.4D 4-Channel High Fidelity Class-D Amplifier A600.1D 1-Channel High Fidelity Class-D Amplifier A150.4D High Fidelity Class-D Amplifier...
  • Page 2 Controls and Functions (150.4D) X1-X10: When this switch is set to X1, the each pair of inputs. For line level input sen- filter frequency range is 50Hz-500Hz. When sitivity, Min is 10Vp and Max is 500mVp. Turn On Mode: this switch is set to X10, the filter frequency Signal: Senses audio signal on the speaker DO NOT APPLY MORE THAN 30Vp TO THE range is set to 500Hz-5000Hz...
  • Page 3 A600.1D operate exactly like the filter to its highest frequency (500Hz) and to help blend the sound of the subwoofer controls on the A150.4D. The Power and the High Pass filter to its lowest frequency into the sound of the front speakers.
  • Page 4 Connections: A150.4D +12V GND: Connect to the metal part of the ve- REM: Connect to the remote turn on circuit LOW LEVEL INPUT: Connect these to the hicle’s body. Scrape away paint to ensure of the head unit or the vehicle’s accessory RCA type outputs of an aftermarket head a low resistance connection.
  • Page 5 These connections are cable between this connector and the also common inside the amplifier. the same as for the A150.4D with the fol- connector on the remote level control. The lowing exceptions. The A600.1D is a single remote level control is sold separately.
  • Page 6 Remote Level Control (Optional): For one If you need to control several amplifiers A600.1D and one RLC, plug one end of with a single level control and you would the RJ11 cord into the RLC and the other prefer not to use a bunch of splitters, you end into the amplifier.
  • Page 7 When using the crossovers in the A150.4D sensitivity of the amplifier with the output high frequencies to ensure an inaudble and the A600.1D:...
  • Page 8 ..... 210mm x 126mm x 32mm 8-17/64” x 4-61/64” x 1-17/64” 8-17/64” x 4-61/64” x 1-17/64” Warranty: Audiofrog A Series amplifiers purchased in the U.S. are warranted to the original purchaser against man- ufacturing defects for one year from the date of original purchase.

This manual is also suitable for:

A600.1d