Additional Preparation; Connecting The External Devices - JVC 0305MKH-CR-MU Instruction Manual

Additional preparation

Connecting the external devices

Connect the devices to the TV, paying
attention to the following connection
diagram.
Before connecting anything:
• Read the manuals provided with the
devices. Depending on the devices, the
connection method may differ from the
figure. Also, depending on the connection
method, you can change the device
settings so that it works properly.
• Turn off all the devices including the TV.
• The "Specifications" on page 43 contains
the details of the EXT terminals. If you
are connecting a device not listed in the
following connection diagram, see the
table to choose the best EXT terminal.
• Note that connecting cables are not
supplied.
• If the VCR's audio output is in mono,
connect the VCR's AUDIO OUT (audio
output) terminal and the TV's EXT-4
AUDIO L/MONO terminal with an audio
cable.
1 VCR (composite signal)
2 VCR (composite signal/S-VIDEO signal)
3 T-V LINK compatible VCR (composite
4 Decoder
5 DVD player (composite signal/S-VIDEO
6 DVD player (composite signal/RGB
7 TV game (composite signal/RGB signal)
8 TV game (composite signal/S-VIDEO
9 Headphones
0 Camcorder (composite signal/S-VIDEO
- SCART cable
= Audio cable
~ Video cable
! S-VIDEO cable
Side of the TV
S
R L/MONO
EXT-4
P
Back of the TV
EXT-
EXT-
signal/S-VIDEO signal)
signal)
signal)
signal)
signal)
S
R L/MONO
EXT-4
P
1
L
R
AUDIO OUT
2 3
EXT-
S
37