Advertisement
6' Show 'N' Fold™ Display & Graphic Header
Congratulations on the purchase of your
Show 'N' Fold™.
Owner's Manual
Includes:
Parts List
Assembly Instructions
Please read all of the information carefully and
contact your distributor or supplier with any issues.
Parts List
Important: Before you begin please count
and inspect all pieces.
1 � Panel Display (A)
1 � Header Display (B)
1 � Header Graphic (C)
2 � Header Connector (D)
1 � Soft Carry Case (E)
Assembly Instructions
Step 1
Lay header (B) flat on table. Place header graphic (C) Velcro™ side down, on Velcro™ receptive header
(B) of the display.
Step 2
Unfold side panels to approximately 30º angles and set on tabletop.
Step 3
Line up the connector (D) with the groove on the edge of the center panel (A). Push down until the
connector is sitting on top of the panel (A). Repeat on the other side of the center panel.
(A)
(B)
(C)
(D)
Item # 147007
(E)
Advertisement
Table of Contents
Summary of Contents for Showdown Displays Show 'N' Fold
- Page 1 6' Show ‘N’ Fold™ Display & Graphic Header Item # 147007 Congratulations on the purchase of your Show ‘N’ Fold™. Owner’s Manual Includes: Parts List Assembly Instructions Disassembly Instructions Storage Instructions Care Instructions Warranty Information Please read all of the information carefully and contact your distributor or supplier with any issues.
- Page 2 Assembly Instructions (cont.) Step 4 Line up the groove on the edge of the header (B) with both connectors (D). Slide header (B) down until it rests on top of the center panel (A). Disassembly Instructions Step 1 Remove header (B) and connectors (D) from display (A). Fold display (A) together in Z-shaped pattern, and lay it flat.
Need help?
Do you have a question about the Show 'N' Fold and is the answer not in the manual?
Questions and answers