Download Print this page

HT SMART Plus Quick Start Manual

Electronic control for towel radiators

Advertisement

Quick Links

Electronic control for towel radiators
SMART Plus is an electronic thermostat for the automatic control of electric
towel radiators. By means of an external sensor it is capable of keeping the
ambient temperature to a desired value.
Ten different electric resistances are available in a range between 100W and
1000W.
Operative modes: Comfort, Boost, Standby/Antifreeze, Timer12
and Timer24.
• "Comfort" mode: The thermostat keeps the room
temperature at the value set by the user.
"Boost" mode: In "Boost" mode the heating element is
activated for a period of 2 hours independently of the
configured temperature. The temperature is however
automatically controlled in order not to exceed 29°C. At the
end of the 2 hours period, the device returns to "Comfort"
mode.
"Timer"mode: The control system enters into "Boost" mode
for 2 hours; after that it returns into "Comfort" mode for 22 or
10 hours (period configurable by the user) and then it enters
again into "Boost" mode for 2 hours. This sequence is
repeated endlessly.
"Stand-by" mode: In this mode the device goes in standby and the heating element is powered off.
SMART is a certified product:
SMART is compliant with the following standards:
-Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).
-EN 60335-1:2012 -EN 60335-2-30:2011 -EN 60335-2-43:2005
-EN 61000-3-2:2004 -EN61000-3-3:1995 -EN 50366:2003
-EN 55014-1:2008 -EN 55014-2:1998
"SMART Plus"
Available colors: - White(RAL 9003).
- Crome.
Rev.3 agosto 2020

Advertisement

loading
Need help?

Need help?

Do you have a question about the SMART Plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HT SMART Plus

  • Page 1 “SMART Plus” Electronic control for towel radiators SMART Plus is an electronic thermostat for the automatic control of electric towel radiators. By means of an external sensor it is capable of keeping the ambient temperature to a desired value. Ten different electric resistances are available in a range between 100W and 1000W.
  • Page 2 “SMART Plus” Electronic control for towel radiators Product Electronic control for towel radiators Applications Towel radiators Insulation class Classe I ClassII IP level IP44 Temperature settings Digital Selectable temperature range 14°C ÷ 29°C - 7°C Antifreeze Operational temperature -10°C ÷ 40°C...
  • Page 3: Risk Of Electric Shock

    “SMART Plus” Electronic control for towel radiators Example of automatic temperature control performed by the Smart Plus (configured temperature: 20°C and a cold wall with a temperature of -5°C). 21,00 20,80 DM= maximal drift = 0.06 20,60 AM= Tmax – Tmin = 0.12...
  • Page 4 “SMART Plus” Electronic control for towel radiators Installation guide For authorized installer only • Disconnect the device from power supply before proceeding with installation.. • Protect the device with a 30mA RCD circuit breaker Insert the heating element in the threaded opening located on the bottom part of the radiator.
  • Page 5 “SMART Plus” Electronic control for towel radiators User Guide "Comfort Bar": Indicates the selected temperature and Heating element further accessory [On/Standby] button. information 1/2" GAS thread for fastening on the radiator. [+] and [-] buttons: For setting the desired temperature.
  • Page 6 “SMART Plus” Electronic control for towel radiators Press the [On/Standby] button to turn on the device or to enter the “Standby/Antifreeze” mode. NOTE: When the device is switched to "Standby/Antifreeze" mode, it beeps twice for 0.5sec. When the device is switched to “On” mode (i.e. it is turned on), it beeps for 1sec.
  • Page 7 “SMART Plus” Electronic control for towel radiators “Boost” mode: Press the [Boost/Timer] button to activate this operative mode. This mode activates the heating element to the maximum power for 2hrs (for safety reasons the maximal temperature is limited to 29°C).
  • Page 8 “SMART Plus” Electronic control for towel radiators Boost/Timer LED functioning summary Blinking red "Boost" mode active. The heating element is powered for 120 minutes (temperature of the ambient automatically limited to 29°C). Blinking "Boost" function active in Timer24 mode. The heating element is powered...