Installing The Cartridge Group; Fig. 90: Installing The Cartridge Group - ABB A150-M58 Operation Manual

Operation Manual / A150-M58/68
11 Dismantling and fitting, cartridge concept / 11.8 Installing the cart-
ridge group
11.8

Installing the cartridge group

Fig. 90: Installing the cartridge group
1. Attach lifting gear to bearing casing.
2. Remove the fixing screws and lift cartridge group out of the service support (90012).
3. Screw the threaded stud (42191) into the clamping nut (42201) from below as far as its
stop.
4. Fit new O-rings (42195, 42200).
5. If present: Insert the metal C-ring (51105).
© Copyright 2022 ABB. All rights reserved. HZTL4041_EN Rev.F February 2022