Table of Contents
Advertisement
CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
Miscellaneous Settings
Max Link Speed
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
setting. (Default: Auto)
3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
Smart Fan 5 Settings
Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal
Allows the fan to run at different speeds according to the temperature. You can adjust
the fan speed with System Information Viewer based on your system requirements.
(Default)
Silent
Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed in the curve graph.
Full Speed
Allows the fan to run at full speeds.
Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control.
Temperature Interval
Allows you to select the temperature interval for fan speed change.
Fan/Pump Control Mode
Auto
Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal
control mode. (Default)
Voltage
Voltage mode is recommended for a 3-pin fan/pump.
PWM
PWM mode is recommended for a 4-pin fan/pump.
Fan/Pump Stop
Enables or disables the fan/pump stop function. You can set the temperature limit using the temperature
curve. The fan or pump stops operation when the temperature is lower than the limit. (Default: Disabled)
Temperature
Displays the current temperature of the selected target area.
Fan Speed
Displays current fan/pump speeds.
Flow Rate
Temperature Warning Control
Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
Fan/Pump Fail Warning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump
condition or fan/pump connection when this occurs. (Default: Disabled)
Auto
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
- 29 -
o
F, 90
o
C/194
o
F.
Hide quick links:
Advertisement
Table of Contents
