Bauhn ACDC-0522-W User Manual

Have you got everything?

Unpack the box (be gentle) and make sure all of these items are there:
A. Dual Wireless Charging Clock
B. Power Adaptor
4
1. : press to turn the light on/off and adjust the
brightness
DC PORT: plug in the supplied adaptor to the
2.
DC port and the other end to a power socket
with a power source to power on the unit
LCD DISPLAY SCREEN
3.
Clock Backup Battery: use a screwdriver to
4.
remove the screw and insert a CR2032 battery
(not included).
5W WIRELESS CHARGER LED INDICATOR
5.
5W WIRELESS CHARGING PAD
6.
10W WIRELESS CHARGING LED INDICATOR
7.
10W WIRELESS CHARGING PAD
8.

Operation

Connect the supplied power adaptor to the DC port on the unit and the other end to a wall plug. The
LCD display screen will light up and a beep sound will be heard.
To set the time, press the
buttons to set the hour. Press the
Use the / buttons to set the minutes. Press the
time setting will automatically exit after 30 seconds of no operation). Once the time is set, press the
button to switch between 12 hour/24 hour display mode.
To set the 1st alarm, press the
LCD display screen will flash. Use the
minutes on the LCD display screen will flash. Use the
button again to set the snooze timer (5/10/15/20/25/30 minutes). Press the
setting (the alarm setting will automatically exit after 30 seconds of no operation).
To set the 2nd alarm, repeat the above steps.
To turn both alarms on/off, press and hold the SNOOZE button. It will turn on/off the 1st alarm, 2nd
alarm and both alarms.
When an alarm rings, press the SNOOZE button to enter snooze mode. Press the SNOOZE button
again to cancel snooze. When an alarm rings, press the
alarm will automatically stop ringing after 1 minute of no operation.
Press the SNOOZE button to adjust the brightness of the LCD display screen (high/medium/low/off).
Press the button to adjust the light brightness (low/medium/high/off).
To use the dual wireless chargers, place your smart phone facing up on the 5W/10W wireless charging
pads. The 5W/10W wireless charging LED indicator will light up red when charging. If the smart phone
doesn't start charging, adjust the position and/or remove your smart phone case. Also ensure that there
are is no metal or other objects between the smart phone and the wireless charging pad.
Notes:
The wireless charging function works only on wireless charging compatible smart phones.
Note: this unit uses a button or coin cell battery as backup (not included) as a backup system. Using a
screwdriver, remove the battery compartment cover on the underside of the unit and insert the battery,
ensuring the positive (+) is facing up.
When replacing the battery, do not disconnect the power adaptor otherwise the clock/alarm settings
will be lost.
Your new product is ready to enjoy!
Now sit back and relax... your new product is automatically covered
C. User Guide
D. Warranty Certificate

Product Overview

1
2
3
9.
10. AL: press to display the alarms
11. SNOOZE: press to enter snooze mode.
12.
13.
button. The hour on the LCD display screen will flash. Use the
button again and the minutes on the LCD display screen will flash.
button to enter alarm mode. Press the
/ buttons to set the hour. Press the
Well done, you made it.
by a 1-year warranty. How nice!
User Guide
Model: ACDC-0522-W, ACDC-0522-M
Dual Wireless Charging Clock
C
Top base
Bottom base
9 10 11 12
CL: press to enter clock and alarm settings
In Clock mode, press to adjust the LCD
display brightness. Press and hold to turn
alarms on/off
: in Clock setting mode, press to set the
time and alarm. When alarm is ringing, press
to turn off the alarm
: in Clock setting mode, press to set the
time, alarm, change between 12 / 24 hour
display mode. When alarm is ringing, press
to turn off the alarm
button again to store the time setting (the
button and the hour on the
/ buttons to set the minutes. Press the
button to store the alarm
/ / / buttons turn off the alarm. The
D
5
6
7
8
13
/
button again and the