• Do not attempt to repair or replace any parts other than the replacement parts listed in these instructions. Improper repair or replacement may result in electrical hazards and will void the warranty. wrapping stations 186WM12, 186WM18 PLASTIC CAPS FILM ROLL BAR POWER CORD...
REPLACEMENTS PARTS Item Number Description PWM18212 Fuse - 1A, 250V PWM1824 Cut Off Rod PWM5901 Teflon® Cover PWM6101 Hot Plate Assembly Operating instructions This appliance is designed for wrapping fruits, vegetables, fish, meat, cold food, etc. 1. To load film onto film rod, place film roll onto film roll bearing blocks, tighten the wing nuts and put the plastic caps onto threaded ends.
CLEANING THE UNIT • Unplug the wrapping station before cleaning and/or servicing. • When Cut Off Bar and/or hot plate becomes dirty, clean with a cotton cloth. Do not use metal or other abrasives. Do not immerse the wrapping station in water or other liquids. •...
Cut Off Rod model specifications 186WM12 186WM18 Model Dimensions 151/2"W x 21"D x 5"H 22"W x 26"D x 5"H Amps Hertz Capacity 1 Roll 1 Roll Voltage 115V 115V Wattage 725W 750W Plate Material Teflon®-Coated Teflon®-Coated Maximum Roll Length 12"...
EQUIPMENT LIMITED W ARRANTY VacPak-It warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by VacPak-It covering your VacPak-It brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment.