7 Disassembly and Assembly Instructions
7.1.
Remove the Rear cover
1. See Service Hint (Section 3)
7.2.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P7, P9, P11, P25 and
P35).
3. Remove the screws (×9
7.3.
Remove
the
cover and Rear terminal cover
1. Remove the claw (×1
2. Remove the Side terminal cover.
All manuals and user guides at all-guides.com
) and remove the P-Board.
Side
terminal
).
3. Remove the Adjustment cover.
4. Remove the screws (×4
5. Remove the Rear terminal cover.
7.4.
Remove the Tuner unit
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A1, A6 A11, A12 and A25).
3. Disconnect the flexible cables (A20, A31 and A32).
4. Remove the screws (×2
17
, ×3
, ×1
).
) and remove the Tuner unit.