Advertisement
Quick Links
39530
™
STEAL TH
The MOST Versatile and Easiest To Use Towed Vehicle Braking System available!™
INSTALLATION mANuAL
NEED HELP? CALL - 1-800-470-2287
WARNING
Read all instructions before installing or operating the Stealth.
Failure to understand how to install or operate Stealth could result in property damage, personal injury or even death.
Hopkins Manufacturing Corporation | 428 Peyton St. Emporia, KS 66801
| www.BrakeBuddy.com
Advertisement
Related Manuals for BrakeBuddy STEALTH 39530
Summary of Contents for BrakeBuddy STEALTH 39530
- Page 1 Read all instructions before installing or operating the Stealth. Failure to understand how to install or operate Stealth could result in property damage, personal injury or even death. Hopkins Manufacturing Corporation | 428 Peyton St. Emporia, KS 66801 | www.BrakeBuddy.com...
-
Page 2: Main Unit
STEP 1: IdENTIfy All ComPoNENTS ANd ToolS NEEdEd All components have been marked on the bag with A-E. Remove all components from the box and go through each bag separately to ensure all components are accounted for. NOTE: If you have any questions while installing the Stealth, please call 800-470-2287 and we will answer all your questions. COmPONENTS A. - Page 3 C. All-IN-oNE AdAPTER 5 - 1.0” self Tapping Screws 3/8” Washer 10 AMP Fuse Holder Break Away Mounting Hardware 3/8” Bolt 10 - Cable Ties Dust Cover Battery Post Clamp Mounting Bracket Grease Packet 2 - Splices Break Away Harness Hook and Loop Strips 311-0288-281 Rev.
-
Page 4: Vacuum Pump
d. VACUUm PUmP 4 - Cable Ties Vacuum Pump Harness 1/2” x 1/2” x 1/4” Tee 1/2” Vacuum Hose 3/8” Vacuum Hose 1/4” Vacuum Hose 3/8” x 3/8” x 1/4” Tee 1/4” Adapter 1/2” Check Valve 3/8” Check Valve Vacuum Line (48” Long) Hose Clamp Vacuum Pump E. - Page 5 STEP 2: PoSITIoN mAIN UNIT (A) 1. Take main unit and position in the most convenient, out of sight place in the towed vehicle. Below are some suggested mounting locations. IN THE TRUNK UNdER THE SEAT NOTE May want to check with RV’er to see where they would like it placed.
- Page 6 STEP 5: CUT CABlE To lENGTH oN mAIN UNIT (A) 1. Mark the outside of the black cable cover (reference picture of main unit on page 3) to the desired length Do Figure 3 not cut at this time. NoTE 2.
- Page 7 STEP 7: INSTAll All-IN-oNE AdAPTER oN THE ToWEd VEHIClE (C) 1. Find a position on the front of the towed vehicle to Figure 7 mount the All-in-One Adapter and install mounting bracket with 4 self tapping screws provided in (C). NOTE This can be mounted in the grille, bottom of the bumper or wherever convenient for your particular vehicle to make...
- Page 8 BREAK-AWAy HARNESS (oPTIoNAl) 1. The Break-Away Harness comes equipped with a towed vehicle connector for activating turn/ brake / taillights. This connector is Plug-in Simple!® to a Hopkins/BrakeBuddy Towed vehicle wiring kit. Reference diagram below. Wiring diagram of BrakeBuddy Stealth...
- Page 9 STEP 11: INSTAll VACUUm PUmP (d) 1. Install Vacuum Pump under the hood by the brake booster using wire towed vehicle ties. Make sure the vacuum pump is mounted away from high heat areas vacuum line to power and moving parts. brake booster 2.
Need help?
Do you have a question about the STEALTH 39530 and is the answer not in the manual?
Questions and answers