Operating Instructions Quick Start Guide - NuvoMed BFS-6/0355 Instruction Manual

NOTE: This device is a personal monitor and should be used in a consistent manner for the most accurate
reading. While readings of this analyzer might be different with that of others (hydro-densitometry or hand
held calipers), your changes in body fat percentage shown by this device will be reflected accurately.
While this analyzer will work accurately as a scale for anyone and give accurate body fat readings for a ma-
jority of people, it is not intended for being used by pregnant women or children under the age of 18.
OPERATING INSTRUCTIONS
Quick Start Guide
1. Remove the battery cover at the back of Wireless Body Analysis Scale, and insert 2x1.5V AAA batteries
(not included) into the unit. Make sure the polarity is correct when done. Then, put back the battery cover. Do
not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
2. Place the unit on a hard flat surface (avoiding carpets or soft surface).
3. To set "units" in lbs, press the button located on the back of the unit, right behind the display. The set
display unit is kg, lbs, st:lb.
4. This product does not have an ON/OFF button. It will turn on when you press the middle button located on
the back of the unit.
Compatibility
This Wireless Body Analysis Scale is compatible with the App – "NuvoMed"
This Wireless Body Analysis Scale and App is compatible with the below devices using iOS 7.0 and above, and with
Bluetooth 4.0 and above -
· iPhone 5 and above,
· iPod Touch 5 th GEN and above,
· iPad 4 and above, etc.
This Wireless Body Analysis Scale and App are compatible with the below devices using Android 5.0 and above, and
with Bluetooth 4.0 and above -
·
Samsung Galaxy S5 and above,
· Samsung Note 4 and above, etc.
4
Operating Instructions