iZone TwinXL Assembly Instructions

Adjustable Platform Frame
TwinXL/King Size
Contains One (1) Frame and Hardware
Carefully remove all parts from the box. Arrange on a at surface
and verify you have all of the following parts and hardware.

PARTS LIST

A.
Platform Frame
D.
Mattress Guard (1 pc)

HARDWARE LIST

G.
Washer
(4 pcs)
ASSEMBLY INSTRUCTIONS

STEP 1

Familiarize yourself with the platform frame
(Part A). Wood slats on the frame are divided
into sections by hinges which allow the bed to
adjust. The head section has 4 wood slats and
the foot section has 6 wood slats.
D
(1 pc)
Motor
attachment
point
H.
Nylon Washer
(8 pcs)
B.
Head Section
Motor Rail (1 pc)
E.
Leg (4 pcs)
I.
Hex Key
(1 pc)

STEP 2

VIEW LOOKING DOWN
White nylon washers
(Part I) installation
Unfold the frame (Part A) and lay it upside down.
Attach the head section motor rail (Part B) to the
head of the frame using the preinstalled screws
and nylon washers (Part H).

IMPORTANT NOTES:

1. Never sit directly on the head or foot sections of
the bed when they are not in the at position.
2. Two wooden replacement slats have been included
with this base. Do not throw them away. Store these
replacement slats in a safe place for future use, if needed.
C.
Motor with Attached
Remote Control (1 pc)
F.
Connector Bracket (1 pc)
J.
Wrench
Note.
(1 pc)
hardware comes
preinstalled.
(2 locations)
Some
VIEW LOOKING FORWARD
White nylon washers
(Part I) installation
(2 locations)
(Continued)