Page 2
SUGGESTION FOR HOLES DISTANCES Before You start: Please unpacking and check-up the product, if it is complete and not being damaged. Supplied supporting brackets/fixings system and screws are only for solid, full wall. Take care that you are using, by yourself, the right screws for wall type –...
Page 3
For the wall-fixing of column-cabinet, half column-cabinet, mirror-cabinet and mirror with shelf, drill a hole with a twist-drill of diam. mm.8-0 following the previous signs, drawn with a pen, insert 5/16 the dowels inside the holes, then screw with the supplied key-hook. For the height adjustment of column-cabinet, half column-cabinet, mirror with shelf, mirror-cabinets, screw clockwise or screw anti-clockwise as pictures.
Page 4
Drill the holes with a drilling machine, where you marked the points. Insert the equipped dowels and fix the supporting bracket, screwing the equipped screws. Re-set the column-cabinet as the before position In case there are doors, covering the storage-shelves, for the door adjustment, please follow the above instructions.