On A Photovoltaic Solar Panel - TecSup BABY User Manual

BABY
5.3 On a photovoltaïc Solar Panel
Plug-in the Solar Panel cable (found inside the case) and connect to
the "entrée 12VDC'" socket.
Connect the Solar Panel to the cable; be careful to respect the
polarity. The maximum power accepted by the BABY is 60W, even
if the solar panel provides a higher power. There is no risk in using
a solar panel providing more than 60W.
Once the charge is finished, unplug and make sure the protective
waterproof caps are screwed onto the sockets.
The Solar Panels proposed in the list of accessories can be plugged
directly to the lamp via the "entrée 12VDC'" socket.
If a cable (mains or cigarette lighter) is damaged, it must be
replaced by a cable from TECSUP (see #10).
TECSUP - BABY - Manuel utilisateur - 80300106 L - P 26 / 50