Advertisement
GNS181PEX: Low Profile GPS / GLONASS / Galileo / BeiDou Clock (PCI
Express)
The board GNS181PEX is designed as a low profile board for computers with PCI Express interface. The
rear slot cover integrates the SMA antenna connector, a BNC connector for modulated time codes, a 9pin
D-SUB male connector and four status LEDs (2mm light pipes). With this standard height bracket you can
use the D-SUB connector for I/O signals like RS-232 - PPS and PPM and you can use this interface for
firmware updates.
The GNS181PEX is delivered including a low profile bracket. You can mount this part instead of the standard
bracket, to run the GNS181PEX in computers with smaller housing (e.g. 1U server).
The integrated GNSS receiver requires an external antenna. It can be configured to use GPS, Galileo,
Beidou and GLONASS. The configuration allows the user to select one of these sources to be used
exclusively or a combination with up to three of these sources:
* GPS
* GLONASS
* BeiDou
* GPS + GLONASS
* GPS + BeiDou
* Galileo
* GPS + Galileo
* Galileo + GLONASS
* Galileo + BeiDou
rev 2021.1202.1502
Page 1/6
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
https://www.meinbergglobal.com
info@meinberg.de
gns181pex
Advertisement
Table of Contents
Related Manuals for Meinberg GNS181PEX
Summary of Contents for Meinberg GNS181PEX
- Page 1 D-SUB connector for I/O signals like RS-232 - PPS and PPM and you can use this interface for firmware updates. The GNS181PEX is delivered including a low profile bracket. You can mount this part instead of the standard bracket, to run the GNS181PEX in computers with smaller housing (e.g. 1U server).
- Page 2 The GNS181PEX comes with a truckload of features to enable software developers to overcome the timing limitations of COTS operating systems like Linux or Windows. The powerful and highly functional Meinberg API (Application Programming Interface) delivers an easy to use and portable way of accessing all Meinberg bus level timing devices, including ISA, PCI, PCI-X, PCI Express and USB time synchronization products.
- Page 3 NTP time server to provide accurate time to NTP clients on the network. Some command line tools can be used to modify configurable parameters and monitor the status of the clock in use. Please contact Meinberg's Support Team for more information on using the card with other operating systems: techsupport@meinberg.de.
- Page 4 Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud Data format: 7N2, 7E1, 7E2, 8E1, 8N1, 8N2 Time telegram: [1] , SAT, Uni Erlangen (NTP), SPA, Meinberg Standard-Telegram NMEA0183 (RMC) or [2] capture-telegramm Statusbyte Informations about free running mode, daylight savings time and DST pre-switch...
- Page 5 This product is handled as a B2B category product. For disposal, it must be returned to the manufacturer to ensure WEEE compliance. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will cover the costs for the waste disposal itself.
- Page 6 Manual The English manual is available as a PDF file: [4] Download (PDF) Links: [1] https://www.meinbergglobal.com/english/specs/timestr.htm [2] https://www.meinbergglobal.com/english/specs/capstr.htm [3] https://www.meinbergglobal.com/english/specs/gpsopt.htm [4] https://www.meinbergglobal.com/download/docs/manuals/english/gns181pex.pdf rev 2021.1202.1502 Page 6/6 gns181pex...
Need help?
Do you have a question about the GNS181PEX and is the answer not in the manual?
Questions and answers