Page 2
OWS-1 The OWS-1 speaker is designed to mount directly to a wall. Each OWS-1 speaker has (4) keyholes on its rear to allow either a vertical or horizontal placement. Each speaker will require (2) 1-1/2, " #8 wood screws fastened to a wall stud.
Page 3
(i.e., +). Heavier gauge wire should be used when more than 50 feet of speaker wire is required.The wire channels on the rear of the OWS-1 will accommodate most types of 14- to 18-gauge wire. NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options.