Subscribe to Our Youtube Channel
Summary of Contents for Stahl TEF 2882
-
Page 1: Document Properties (Tum7225)
Installation and operating manual TEF2882 Navigation Light Navigation Light TEF 2882 Document properties (TUM7225) Revision Comment Revision Approved date First issue 21.01.2022... -
Page 2: Table Of Contents
Installation and operating manual TEF2882 Navigation Light Installation and operating manual Contents Document properties (TUM7225) ..........................1 Warnings and risk levels ............................3 General information ..............................3 Marking and intended use ............................4 Technical data ................................. 4 Product description ..............................4 Transport and storage ............................. -
Page 3: Warnings And Risk Levels
Installation and operating manual TEF2882 Navigation Light Warnings and risk levels DANGER Non-compliance with the instruction results in risk of severe or fatal injuries to persons WARNING Non-compliance with the instruction may result in risk of severe or fatal injuries to persons CAUTION Non-compliance with the instruction may result in risk of injuries or damage to equipment NOTICE... -
Page 4: Marking And Intended Use
Installation and operating manual TEF2882 Navigation Light Marking and intended use CAUTION Not intended for use in “these” conditions (Where mud may be present, on helidecks, underground, direct sunlight, heavy vibrations, high risk of impact, harsh cleaning agents, high pressure washer etc.) K2W –... -
Page 5: Mounting And Installation
Installation and operating manual TEF2882 Navigation Light Mounting and installation DANGER Incorrect mounting and installation may lead to risk for falling objects, risk for electric shock or fire and risk for equipment malfunction. In turn, this can lead to severe damage and/or injuries. Mounting See figure 1 &... -
Page 6: Positioning Of Lights
Installation and operating manual TEF2882 Navigation Light Figure 2 Positioning of lights Inboard screen is not required as the light itself fulfill the requirements. If an inboard screen is installed please follow the following procedure: Ref. COLREG 72, Annex I. Electrical connections Only qualified electrical personnel may install and start up the QPD components. - Page 7 Installation and operating manual TEF2882 Navigation Light 7. Screw the terminal nut together with the light connector socket (4). For this, we recommend using either the socket wrench, a wrench, or a plier. Screw the terminal nut as far as it will go, or with the specified torque. It must not be possible to unscrew the terminal nut again by hand.
-
Page 8: Options And Spare Parts
Installation and operating manual TEF2882 Navigation Light Options and spare parts Image Description Part No Cable termination nut Ø6 -11 mm 50500223 Cable termination nut Ø9-16 mm 50091435 Plug connector for cable Ø6 - 11 mm Digital output (Alarm Plug connector for cable Ø9-16 mm output) Protective cap for unused cable entries IP68 50500226... -
Page 9: Compliance/Conformity
Installation and operating manual TEF2882 Navigation Light Compliance/Conformity IEC 60945 Cl. 4.5.3 “Compass safe distance” waived according to EN 14744 Cl. 4.8.8 “No magnetic materials” IEC 60945 Cl. 8.8 “Rain and spray” omitted according to EN 14744 Cl. 5.3.6 “Covered by IP67” EN 60529:2013 –... - Page 10 Installation and operating manual TEF2882 Navigation Light Appendix #1...
Need help?
Do you have a question about the TEF 2882 and is the answer not in the manual?
Questions and answers