Using The Pulse Rate Monitor (Via Pulse) - HighGear FITWARE Series Manual

USING THE PULSE RATE MONITOR
(VIA PULSE ONLY)
In any pedometer mode:
1. Press the START key to acquire the PULSE-
READING MODE.
2. Place your index finger on the Pulse Rate
Sensor located top of the pedometer (Do not
press too hard). The Pulse Monitor will begin to
detect the pulse automatically.
NOTE: It may take few seconds to display the
current pulse rate (BPM= Beat per minute).
VIA_FMBFPulse.indd 13
All manuals and user guides at all-guides.com
13
10/18/05 9:27:26 AM