X692 User's Guide Chapter 1 Overview Important Notice: “All channels are subject to coverage and may be changed from time to time. Reception may depend on the type and condition of your existing aerial. Aerial upgrade may be required. Please confirm coverage in your area.” We strongly recommend that you install an outdoors antenna when you use the DTV receiver indoors.
Graphics card:PC NVIDIA GT630 or above;NC NVIDIA GT735M or above OS: /Windows7/windows10/Win11 2.1 Hardware Connection Insert the X692 into the PCIE interface of the computer and lock the screws Chapter 2 How to install driver and software Windows Driver and Software download link:...
Page 3
Step2: Click “Next” to continue installation,Wait about ten seconds Step3:Click Finish,Driver Install Complete...
Step4:Check whether the driver is installed successfully Method: Right click on my computer-Device Manager-Sound Video and game controllers-IT9300 BDA Device Note:If the driver installation is unsuccessful, please check whether the hardware is properly connected, you can try to replace another USB port 3.2 Software installation Step1: Click “MygicaHiDTV Install”, Step2: Installation of HiDTV, Choose setup language...
Page 5
Step3: Click “Next” to continue installation Step4: If you want to change the destination folder, please click “Browse” and click “next” (Recommended is better) Step5: Please click “Installt”...
Page 6
Step6: Click “Finish”, the Hidtv software is installed on your computer. Step7: You will see that HiDTV application icons will appear on your desktop. 3.3 HiDTV user interface Welcome to HiDTV. A most powerful multimedia application that allows you to access and work with Digital TV, recorded TV Programs, Radio from your PC and Laptop.
Page 7
1 Minimize window 10 Signal strength display window 2 Full screen/window switch 11 Setting: Record file format setting. Hardware setting Recorded file location setting. Schedule Recording setting 3 Exit HiDTV software 12 EPG: open HiDTV EPG window 4 Playback ( time-shifting,) 13 Available channel list Recorded file playback 5 Video: record the current playing audio and...
Page 8
1.Please double click HIDTV.exe software, then click on the menu, as we know the device has quad tuner, you can choose one of tuner as following image showed. 2.Click “ scan channels” to scanning channel...
Page 9
3. Note: ATSC select Antenna tv QAM select cable tv then, click “Scan” to scanning channels. 4.Choose to stop and play after the channels been scanned.
Page 10
5.It can be realized that you can watch TV channels while you do recording of different channel. 1.Choose “Setup” to select “PIP” 6. Right-click on the screen to select ATSC BDA Filter1/1_2/1_2_3 or QAM BDA Filter/1/1_2/1_2_3...
Page 11
7.You'll be able to see four windows play 7.Select 1 or 3 tuner to do record.
Page 12
Frequency Ask Question (FAQ) 1. Can not lock any program channel when auto scan. 1. Please check if there is ATSC/QAM broad casting program in your area; 2. Please check if your signal condition is too weak, try to move the antenna around and re-scan again, it is better to move the antenna near the window 3.
Need help?
Do you have a question about the X692 and is the answer not in the manual?
Questions and answers